Henlo StarBeans!!

I am so excited to finally share this month's collab with you all: Dango Fidget Bolts!!

This one was a collaboration with BucklenShackle (James), who is genuinely one of my favorite people to collab with. He creates some of the coolest fidget bolts around, and the amount of creativity and work he puts into every design is incredible. If you have not checked out his page yet, you definitely should!

These little dango friends are adorable and super satisfying to fidget with. Twist them, spin them, stack them on a tray... they are the perfect little fidgety food companion!

Huge thank you again to James for another amazing collab. It was such a blast bringing these little guys to life together.

If you print some, I would absolutely love to see them! Be sure to tag both of us so we can share your colorful little dango creations!

WHAT'S INCLUDED

• Dango Fidget Bolt with 4 different cap/face options
• Dango Clicker Top (print at 100% only)
• Multiple Dango Face Options
• Two Display Tray Sizes
• Printable Dango Label Stickers

RECOMMENDED PRINT SETTINGS

• Layer Height: 0.16mm
• Infill: 15%
• Supports: Not usually needed
• Filament: Matte PLA or Regular PLA
• Adaptive Layers recommended for a smoother finish

PRINTING NOTES

• The clicker top should not be resized. Everything else was printed at 60% and looks super cute!
• Missing the small "+" attachment piece? It may not have adhered to the build plate. Try washing your plate, increasing the bed temperature by about 4-5C, adding a brim, and reprinting the piece.
• If your clicker feels loose, make sure it is fully seated and try gently bending the metal pins inward (or trimming them off if needed).
• Remove all brim and support material before assembly for the smoothest click.
• If your fit is unusually loose or tight, minor printer calibration or scaling the attachment piece by approximately +/-0.1% may help.
• If the eyes or mouth disappear while slicing, use the paint bucket tool instead of object paint to fill them back in. This is a normal slicer quirk with very small split objects. The included 3MF is already set up correctly.

Hi there! I am Mouse and I love art and 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this.

If you like this design, please check out my other models: https://cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without my explicit consent.

To legally obtain permission to sell physical prints, you may become an active Patreon supporter: https://patreon.com/c/StarMouse3D

Please do not share digital files. Thank you.

Please be warned that these models are not toys and are not recommended for young children or anyone at risk of a choking hazard. Small parts may break if handled roughly. Printed models are not food safe. Print at your own risk.

I make all of my designs from scratch in Blender without the use of AI.