This skin is composed of multiple parts that need to be printed separately. Print the sun with the concave part facing upwards, the mountain with the second part of the magnet hole also facing upwards and divided into parts to separate the snow from the mountain and assign the desired colors. The cherry branch should also be divided into parts in the slicer to assign the desired colors (be aware, there are a very high number of parts). The clouds can be printed as they appear. The printing of additional decorations such as the clouds and the cherry branch is entirely optional. Once printed, the mountain and the sun should be joined following the magnet hole on the back and using a bit of glue. The additional decorations must also be joined using a bit of glue. Print with a 0.4 nozzle, 0.2 layers, 15% rectilinear infill, and 2 walls. Supports are not required. For the cherry branch, activate the thin wall detection, otherwise, you will not be able to print it.