This model is restricted by licensing terms.
View license.
3 Likes11 DownloadsSeptember 8, 2023
This model is restricted by licensing terms.
View license.
This Husky was created using Stable Diffusion.
The dimensions are 150x150
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyLite White Transmission Distance: 5
Swap Instructions: Start with Charcoal Black At layer #11 (0.56mm) swap to Grey At layer #22 (1mm) swap to Silver At layer #33 (1.44mm) swap to Cotton White At layer #39 (1.68mm) swap to White for the rest.
Category:
3 Likes11 DownloadsSeptember 8, 2023
This model is restricted by licensing terms.
View license.
3 Likes11 DownloadsSeptember 8, 2023
This model is restricted by licensing terms.
View license.