11 Likes44 DownloadsJuly 7, 2023
3D MODEL DESCRIPTION I wasn't satisfied with the other locks out there and how they gripped the wheels to lock them in place. There was still too much movement. I've designed a dual locking system that will keep the wheel lock snug and the wheel in place.
Please note these are for the upgraded Creality wheels and NOT the plastic stock wheels. Also note, the letter on the two clamps have been removed from the final upload. The dual lock also may not work for everyone. Single should work for most.
Free for the first 100 downloads!
3D PRINTING SETTINGS Layer Height: 0.2mm Print Speed: 50mm/s Filament: Whatever (I used PLA from Overture) Infill: 40%
Categories:
11 Likes44 DownloadsJuly 7, 2023
11 Likes44 DownloadsJuly 7, 2023