Here, I present yet another storage contraption, this one sporting a fully symmetrical design which was the challenge I had In mind. Please read the text bellow before printing.
05-02-2024: Veetec3D is now offering hardware kits for this model (this is not me, but in collaboration with me :)
https://veetec3d.etsy.com/listing/1672804097/cosmic-symmetric-stashbox-hardware-kit
17-01-2024: Added files with 8,5mm opening for rods
03-01-2024: added additional notes to the text
Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming next! https://www.instagram.com/smackmax_/
Many projects were just personal projects at the time; I did not expect this much love. Because of that, they can be complex to print and assemble, so keep that in mind before you print and read the additional notes in the description. Looking at the reviews and makes by others can also help you make that decision.
Requirements:
4 x Rods with a diameter of 8 mm and a length of 195 mm (i used aluminium 8mm about 2 euros per meter at the local hardwarestore)
Filament of your choice for 3D printing (i used fiberlogy copper,gray and graphite PLA)
8 x Allen bolts (4x15 mm) (used for attaching the Handle/Grill File to the side plates)
12 x Allen bolts (4x10 mm) (used for securing the rods in a fixed position, used in side plate and the locking Wing file)
4 x Allen bolts (5x20 mm) (used for attaching clips)
4 x Hex nuts (M5) (used for attaching clips)
superglue (used for attaching the option tray butt file, but this makes it no longer truly symmetric, and if needed to secure the Clam to the side plate but should pressure fit)
Things to note:
-The rods can be any material but I found the aluminium can be a bit oval, the sliding action needs perfect 8mm rods to slide nice and free.
-Sanding the contacting surfaces might be needed for smooth operation
-Heat can be used to press in place bolts and nuts if they don’t coorparate
-Handle and Grill file can be switched for a fully symmetric look
-print oriëntation(all need support): Shells should be printed with the lips pointing upwards, sides can be printen on their back, handle and grill on their back aswell (handle needs support under the bridge), wing lock should be printen like a arrow pointing upwards, the clips go on their side.
(03-01-2023) additional notes:
I have added a video showing how the mechanisme works; I have addes superglue to the list of needed materials and make small notes where what hardware goes) Added additional note and picture about my suggested print orientation; The tray butt is a optional file that needs to be glued in place, due to it not making the thing symmetric; The Shell needs to be glued to side plate if your friction fit is not enough (mine does not use glue); The design is zero-tolarance, so drilling out some of the holes might be needed; If you enjoy my style and would like to support the creative process,I invite you to declare 'war on boring and mundane designs' together by joining my Printables club(with exclusive models) and supporting the R&D of future projects! There's even an option to become a commercial R&D partner! Dont fancy a subscription based contribution? You can check out one of my paid models or use the paypal link bellow :)
https://www.paypal.com/donate/?hosted_button_id=XTLND2YQYQFFU