Use a Command Strip® to mount this headphone hook to any surface!

Wall Mounted Headphone Hook

Body1.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5124600.

Just a simple Barstool designed and rendered in Fusion360.
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Simple Barstool Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5118642.

Just an Acoustic Guitar made with Fusion360.
  This took me a long time, but the outcome was really satisfying.
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Acoustic Guitar Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4278695.

A simple 4:1 gearbox that I designed with a friend.
  Both the gears require support with shortest side down.
    Shafts are held in by the holding tabs, and are glued down.
      You can use the included fan blade as a waterwheel for fun.
        Please like, remix, make, and comment!

             I Hope you like it!

4:1 Ratio Gearbox

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5132237.

Just a Skateboard rendered in Fusion360.

Skateboard Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5118664.

Just a 60 LB Dumbbell weight made in Fusion360

60 LB Dumbell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5105099.


<iframe width="725" height="453" src="https://www.tinkercad.com/embed/0nhQyhterLP?editbtn=1" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Made in Tinkercad and rendered in Fusion 360
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)
PARTS: You will need a 3D printer, Filament, Computer, Tinkercad account, GRBL CNC controller, Stepper drivers, 4 Nema 17 Stepper Motors, Stepper Motor Couplers, 8mm Linear Roddage, Threaded rods, Small Nuts, Piece Of Plywood, Dremel, Square Tubing, Linear Bearings.

Cheap CNC Machine

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5140690.

Just a Coffee Cup Model Made with Fusion360

Coffee Cup Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5220141.

Just a Ping Pong Paddle made with Fusion360
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Ping Pong Paddle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5217977.

Just a simple Coffee Table made with Fusion360
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)


Simple Coffee Table Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5220147.

Just a Coffee Cup made with Fusion360
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Coffee Cup

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5118614.

Just a fun model of a Ping Pong Paddle in Fusion360.

Ping Pong Paddle Model and Renders

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5126019.

Just a Mantle Clock Model made with Fusion360

Mantle Clock Model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4327642.

I kept breaking my pencil tip, and had to keep go sharpening it!
I made a solution which you can get it for free!
I hope this design helps you as much as it helped me!

The All Day Pencil

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4702182.

Fun little Groot toothpaste barfer for Colgate toothpaste. Comment if you want Crest.
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

GROOTPASTE!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5135304.

Can you do it?
Super long bridge test to make.

150mm Bridging Test

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4319207.

The tolerance ranges from 0.2 MM at the minus sign, to 1MM at the plus sign.
No rafts of supports needed.
Designed in tinkercad.
If tolerances are good, cylinders will fall/slide out.
I hope you find this useful!


Mini tolerance test

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5220246.

A Brick-Themed chest of drawers with 7 drawers.
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Brick Themed Chest of Drawers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4275767.

Quick Tinkercad design.
Hope this comes in handy for you!
[My YouTube Channel](https://www.youtube.com/channel/UC9hu1FcFd5ryK70g8ikdXrg)

Number Stencil

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4275818.

Small Quadcopter Body that fits small 7mm motors.
  Hot glue Mainboard on to the center.
Made for modifying a mini drone.
I Hope you like it!

Small Quadcopter Body

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4273086.

After looking around, I could not find the right linear bearings for my Anet A8 Clone,
so I designed my own. these work great with https://www.thingiverse.com/thing:2640562 
as the bearing holder. I Hope you find them useful!

LM8UU Linear Bearing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4983776.

This is a great holder for your generic Spinbrush from walmart. I put it on my wall with a Command strip. A like would be nice!

SpinBrush Wall Mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Silasclough

Achievements

Seedling

Explorer

Debutant