Zip22 Mohawk PDW Chassis v2.stl

Want all of the fuds at the range to come over and ask "where'd you find that space gun?" 
Just a quick little chassis I threw together for the Zip 22. Intended for use with the female picatinny rail. If you don't have an OEM one, check out the one from user "JamesBoone" (Thing:5398939 his is excelent)

Legal Stuff: Only download if you understand the laws in your area. Has the ability to attach a brace so there is potential for it to be classified as an SBR. I take no responsibility for any legal reproductions as a result of use of my print. Use at your own risk. 

ZIP22 AOD v4.stl

Tired of putting your finger directly next to the barrel of your Zip.22 when clearing jams? Annoyed with the small surface area you have to depress the charging rod? 

Let me Introduce you to what I call the "Anti-Oopsie Device". The AOD presses over the Zip-Load rod and gives you ample room to pull the bolt back AWAY from the barrel to help minimalize the "oopsie" aspect of the ZIP. 
TO PRINT: print with the ridge side down and use brim bed adhesion.
TO INSTALL: Heat up the AOD with a hair dryer or heat gun, add a drop or two of super glue and press the Zip-Load rod into place. 
Note: WILL NOT WORK ON THE ZIP-Restrike ROD. IF NO GLUE IS USED, AOD GETS LAUNCHED ABOUT 5 FEET AWAY. ITS FUNNY BUT I DONT RECCOMEND.

Zip 22 Ghost Ring Sights

A better Iron Sight for the USFA Zip-22. Tight pressure fit so loosen the top two screws to install or remove. 

Recommend printing with Skirt style bed adhesion and no support.

Zip .22 Ghost Ring Sights

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

ShitboxScotty

Achievements

Seedling

Zip22 Mohawk PDW Chassis v2.stl

ZIP22 AOD v4.stl

Zip 22 Ghost Ring Sights