tracking pixel
Selinth

TTRPG Dice Box & Roller

by
Selinth
Follow
Follow
Remix Model
Selinth
Selinth
|
Image 1 of 7
TTRPG Dice Box & Roller 3d model
Selinth
Selinth
|
Image 1 of 7
TTRPG Dice Box & Roller 3d model
2D
3D
Makes
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
TTRPG Dice Box & Roller 3d model
This model is restricted by licensing terms. 

A dice box with a roller built into the lid, for any TTRPG. I personally use mine for D&D, Pathfinder, and Starfinder mostly. It prints in 5 separate parts, the box bottom, the lid, a panel that covers the roller, and two halves of a threaded hinge.

I printed the box, lid, and front panel at .2mm layer height and 60mm/s. For the hinge I had to set it to .15mm and 40mm/s, so fair warning you might need more detail and a slower print for them. I'd use a brim for pretty much every part, since the big pieces can pull up and warp easily and the hinges could use the extra grip since they're pretty thin and tall. I also made sure to use gluestick for the same anti warping purposes.

I printed all of this on a Neptune 3 Pro. I realize the print size is pretty big, so not everyone can print the whole box in one go. I'm working on making a split version that should allow smaller printers to make the box as well. I'll update the files and page when I get it done!

I'm also totally open to feedback and suggestions, especially when it comes to alternate hinge solutions, I feel like this is fine, but probably wouldn't survive a drop or something jarring like that. Idk. Depends on the filament probably. Ideally something that doesn't require reprinting the whole box for those that have done so already.


17 Likes28 DownloadsJuly 7, 2023



17 Likes28 DownloadsJuly 7, 2023
This model is restricted by licensing terms.