I made this headlight bucket for my 06 Honda Shadow because I changed all of my lights to LED and needed more room for wiring the turn signal resistors and wanted an integrated small wind deflector. This is meant to be a bit of a modular design so that I can add wings or other parts in the future based on changing ideas. the two larger holes near the front are for the turn signal bodies, it is a basic design for now and houses sequential LED turn signal/running light LED's from AMAZON. The holes for mounting are meant to be editable depending on what system you use, I have made a custom mount for mine as I am fully customizing my motorcycle. I designed this using Fusion 360 and printed it on my Snapmaker 2.0 A350, the model is solid and took about 6 days to print as it is almost the max capacity of the printer, I printed it with the front hole down and no supports and it required very little post print processing for a completely smooth finish, I then primed and painted with a Rustoleum Metallic blue and a 2k polyurethane clear coat. There is no back as I custom fabricated one from sheet metal that my speedo and tachometer mounts to.