Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5633322.

It's time to travel to the moon aboard the Spacecraft Giraffe! Watch as it rocks back and forth with a turn of the key, keeping a smile on its face and, hopefully, yours.

This is my 2nd attempt at creating a simple toy with a cartoonish design. It is reminiscent of my previous designs based of the old Weird-Ohs and Ratfink models.

The model rocks back and forth at a 25 degree each way with just enough friction to hold it leveled (upright) in the middle. 

Please let me know if there are any problems with the model. Constructive feedback is always welcome.

If you have time, please visit my Facebook page to see my other 3D models and prints:
https://www.facebook.com/ScenestruckArt

Spacecraft Giraffe

Base_Half_2.stl

Giraffe_Body_1.stl

Giraffe_Body_2.stl

Giraffe_Head.stl

Pegs_Resized.stl

Rocket_Back.stl

Rocket_Front.stl

Rocket_Mid.stl

As fall becomes cloaked in bitter cold, birds take flight to warmer climates, except for one: The Canadian Plague Doctor Goose!

Hailing from Canada, this rogue goose dons his frightening costume with leather cloak, brimmed hat and ominous beak mask. His purpose? To stalk Halloween trick-or-treaters for their candy which is then given as treatment to all wounded and sick wildlife, including its fellow avian kind.

Be wary and guard your goodies!

If this creepy model satisfies your curiosity, head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

NOTES:
FDM tested (Ender 3 V2 Neo). SLA print at your own discretion

Print Temp: 205 C
Bed Temp: 50 C
Layer height:0.2mm
Infill: 5 - 15%
Supports: yes (tree supports work)
Speed: 50 mm/s
Filament: Sunlu Black (PLA)

Careful when placing supports around the legs (they may break).

Canadian Plague Doctor Goose

Plague Doctor Goose_Sitting.stl

Plague Doctor Goose_Standing.stl

Let's get ready to rumble with Cyclobber The Boxer!

Armed with nothing but his speed, courage and muscles, this tall blue cyclops takes to the ring to punch out his heavy bag in preparations for the upcoming match. With a devastating left hook, the heavy bag knows Cyclobber is ready to become the next heavyweight champion of the world.

If this sparks the warrior spirit in you, head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

**NOTES:**
- FDM tested (Ender 3 V2 Neo). Files sliced through PrusaSlicer 2.6.1

- Resin print at your own discretion.

- Glue may be required.

- The helmet is an optional piece. It can either be printed separated as a whole or split in halves, or attached to the torso.

**FDM settings:**

Print Temp: 200 - 205 C
Bed Temp: 60 -65 C
Layer height:0.12mm (all boxer parts), 0.16mm (Heavy Bag), 0.20mm (base)
Infill: 3 - 5%
Supports: yes
Speed: 40 - 65 mm/s

Filament (all PLA):

Esun: Light Blue, Purple
Anet: Red, Yellow

Cyclobber The Boxer

Cyclobber_Head Gear.stl

Cyclobber_Head Gear_Split.stl

Cyclobber_Heavy Bag.stl

Cyclobber_L-Arm.stl

Cyclobber_L-Glove.stl

Cyclobber_L-Leg.stl

Cyclobber_L-Shoe.stl

Cyclobber_Peg_Torso.stl

Cyclobber_Pegs_Arms.stl

Cyclobber_R-Arm.stl

Cyclobber_R-Glove.stl

Cyclobber_R-Leg.stl

Cyclobber_R-Shoe.stl

Cyclobber_Shorts.stl

Cyclobber_Stand_Heavy Bag.stl

Cyclobber_Torso w-Head Gear.stl

Cyclobber_Torso.stl

Santa Claus is coming to town!

Have a Very Merry Christmas with this Santa Claus Bobble Sleigh Decoration. Children will smile with delight as you shift his sleigh and reindeer back and forth on two sets of 3D printed springs, fitted onto a snowy rooftop.

Display this large model as a table centerpiece, on a book shelf, fireplace mantle, or perhaps under the tree, and let the Christmas spirit flow throughout your home and into the New Year.

Merry Christmas and Happy Holidays to All!

If this model brings you holiday cheer, then head on over to my Facebook page to view my other 3D designs and prints: https://www.facebook.com/ScenestruckArt

If there are any problems with the models, please let me know. Constructive feedback is always welcome.

**NOTES:**

**-- Previously released on Cults3D Winter 2023 --**

- FDM tested (Ender 3 V2 Neo). Files sliced through Prusaslicer 2.6.1.
- Recommend using glue to hold some pieces together.
- Highly recommend using supports for the springs (normal and/ or tree supports).
- The file "Sleigh_Reins" is optional. You can replace this item with string, twine, etc.

Complete model size:

Centimeters: 28L x 15W x 17H
Inches: 11L x 5.9W x 6.69H

**FDM settings:**

Print Temp: 200 - 205 C
Bed Temp: 60 -65 C
Layer height:0.12mm (Reindeer/springs/reins), 0.16mm (all sleigh parts), 0.20mm (base/pegs)
Infill: 3 - 10%
Supports: yes (tree supports work)
Speed: 40 - 65 mm/s

**Filament (all PLA):**

Anet: Red,
Creality: Avocado Green / White / Light Brown,
Esun: Glass Lemon Yellow

Santa Claus Bobble Sleigh Decoration

A_Base.stl

B_Base.stl

Base_Pegs.stl

Reindeer_All Parts.stl

Reindeer_Pegs.stl

Reindeer_Springs.stl

Sleigh_Body w-Santa and bag.stl

Sleigh_L-Side.stl

Sleigh_Reins.stl

Sleigh_R-Side.stl

Sleigh_Springs.stl

Hello 
My name is James and welcome to Scenestruck Art. I'm an amateur 3D modeler and printing hobbyist. If you like what you see here, please visit my Facebook page to view my portfolio.

Additional Paid models can be found over at Cults3D.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Scenestruck Art

Achievements

Debutant

Sapling