tracking pixel
S

'Brother Scan n Cut' Side storage boxes

by
Sagittario
Follow
Follow
Remix Model
S
Sagittario
|
Image 2 of 5
'Brother Scan n Cut' Side storage boxes 3d model
S
Sagittario
|
Image 2 of 5
'Brother Scan n Cut' Side storage boxes 3d model
2D
3D
Makes
'Brother Scan n Cut' Side storage boxes 3d model
'Brother Scan n Cut' Side storage boxes 3d model
'Brother Scan n Cut' Side storage boxes 3d model
'Brother Scan n Cut' Side storage boxes 3d model
'Brother Scan n Cut' Side storage boxes 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2243211.

These are a couple of tool storage boxes I made to fit various parts. The boxes were stuck to the sides with some light duty double sided tape, in case we need to remove them. Just be aware if you make them, the sides of the Brother cutter are slightly bowed in, at least on ours they were, so you may need extra layers of tape in the area where there is a gap.

0.8mm perimeters 0.2-0.25mm layer height 10% infill


0 Likes2 DownloadsDecember 15, 2022


0 Likes2 DownloadsDecember 15, 2022
This model is restricted by licensing terms.