Can print in vase/spiralize mode with probably any nozzle size. I printed mine with a 0.6mm nozzle in Eryone dual extrusion silk PLA. Scale as you please.

There is a single layer version, two layer version 1 is a straight stack and slightly taller than the two layer version 2 where the second layer is rotated slightly (photographed print).

If intended for use as a pot I do not recommend vase/spiralize mode. Instead use multiple walls, 0% infill and 0 top layers. For a drainage hole a negative modifier in your slicer is all you need :)

Cool S Vase - 2 Layer V2.stl

Cool S Vase - 2 Layer V1.stl

Update 2: Added a yard sign version, this has a thicker base color and slots for zip ties to allow attaching to one or multiple stakes or other things. This will need the same color changes as V2 but at different heights.

Update1: V2 version has some improved formatting of text and raises them above the original model, rather than have them cut out. This adds an extra color change but I think makes the text more readable.

Simple sign, first color is only 1mm thick, second color is same.

Not much more to say about it! Enjoy :)

Cthulhu Sign.stl

Simple sign, first color is only 1mm thick, second color is same.

Not much more to say about it! Enjoy :)

Cthulhu Sign V2.stl

Cthulhu Yard Sign.stl

Designed these parts and printed them in TPU to protect two things - the finish on my cerakote weightlifting bar from the exposed metal on J Hooks and my knees from the corners of the safety bars.

I have a Rogue Monster Lite squat rack and the J Hooks are the standard ones that came with the rack and only has a piece of plastic to protect the bar on the bottom of the hook, so there is exposed metal for bars to rub against. The J Hook Covers in TPU have lasted me months with little sign of wear.

I also had a bad habit of bumping into the corners of the safety bars so I modelled a end cap cover that I also printed in TPU. Hurts a lot less when I bump into these now, but I also bump into them less I think because the red TPU makes it clear where the end cap is against the black flooring.

As far as printing advice - the more perimeters the tougher the piece will be but also less squishy. I recommend leaning towards tougher for the J Hook caps. Safety Knee Saver you can push things as far as you can for softness while still being able to print.

Squat Rack Safety and J Hook TPU Caps

Safety Bar Knee Saver.stl

Replica of the extrusion inserts that came with the Creality Ender-5 S1 Pro acrylic panel kit.

I lost some and figured there's a chance others may suffer the same fate. 

I recommend printing in orientation pictured (and should be model's default). Small amount of support required for the underside of the prong (see picture). Only minor bridging required without.

Print pictured was printed with a 0.4mm nozzle, probably would be fine with 0.6mm too.

If you have also lost the square nut a normal M5 hex nut should fit too. That's what I used.

E5 Panel Insert.stl

I wanted some air tight containers to protect filament sensitive to humidity (I live in the US NE and some of my printers are in the garage). 

I was not satisfied with the options I could find due to specific container limitations, etc. 

The container these were designed to fit is a [Rubbermaid 21 cup container (part# 1776473)](https://www.amazon.com/Rubbermaid-Modular-Storage-Container-1776473/dp/B003EYUZJU/ref=psdc_3744021_t1_B07QWDTZB6). I also modified the containers to feed filament in two directions and added a hygrometer. 

The desiccant container includes space in the lid for a magnet (specifically these [32x3mm](https://www.amazon.com/gp/product/B083FTPPVG/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&th=1)). Depending on spool size sometimes it is easier to locate the box with an external magnet to avoid interference with spool.

I had to create two different heights to account for different spool designs. The center spool is designed to be used with 8 mm x 22 mm x 7 mm (608RS) bearings. They should just press fit on the end of the two pieces, which I glue together but this is optional. If you have some elephants foot then you may have to sand/shave down the protruding material for a smooth action on from the spool.



Spool Holder and Desiccant Box

Spool Holder.stl

Replacements for my GE Oven knobs. 

The plain file versions lack the text and ignition symbols on the side.

Oven Hexaknob

Oven Knob.stl

Models designed to be printed in TPU and worn as wristbands. Sized for kids (I used my 6 year old as a test model) but can be scaled up for adults without issue.

The models can support color printing on single material FDM printers by changing filament at specific layers. All models have layers that are great for Glow in the Dark TPU too (e.g. spiderwebs, ghost body and more). Designed for 0.2mm layer heights.

Cute Halloween TPU Wristbands

Jack-O-Band TPU Wristband.stl

Aliens and UFOs Band v33.stl

Skulls and Tombstones Band v7.stl

The Cool S Saber!

Compatible with the collapsing blades by [3dprintingworld](https://thangs.com/designer/3dprintingworld). Pictured blade was printed using the model from his [Collapsing Sith Lightsaber](https://thangs.com/designer/3dprintingworld/3d-model/Collapsing%20Sith%20Lightsaber-23598). 

For printing I recommend _against_ using a brim, it will be difficult to remove from the details on the top and bottom (or take steps to ensure there is only brim around the outer perimeters). Otherwise the more perimeters the stronger the print. The weakest part is the thread, if your collapsing blade gets suck extended be careful with applying force to push the blade back in to the handle.
For any advice printing the blade please refer to 3dprintingworld's helpful advice in his own models. 

Cool S Saber

Cool S Saber v14.stl

At some point every kid in school started drawing these “Cool S” logos on everything they could find. It seems this is almost a worldwide phenomenon. Also known as the Stussy S, Super S, Superman S, Universal S, Pointy S, Middle School S, Graffiti S, etc.

I don't know why I modeled this, for some reason I thought about it, then thought about how to model it and then tried to model it. Then 8 had to print it. I wasn't designing to any goal or specification. 

The original size should be 125mm tall but I do not expect issues with resizing to be smaller or larger within reason. The overhangs are at 45 degrees, something most printers should be able to print without support. This model can also potentially be printed in vase mode (spiralized outer for the Cura folks). Whatever floats your benchy.

https://en.wikipedia.org/wiki/Cool_S

No specific printing recommendations other than not needing supports with a well calibrated machine. 

Cool S.stl

Simple piece to stick on some metal rods I use to hang some equipment in my garage. But the rods are at upper arm height and beside a tight walkway. So to save myself some pain I printed these in TPU with low infill % and no more than 3 perimeters and stick them on the ends of the rods and my arms are safer.

Elbow Saver v2.stl

Insert for my couch cup holders to make it possible to have a coffee mug/tea cup in the spot. Also useful for my kid's small cups that disappear in to the cup holder.

Update: v4 file has the mode split to two parts to avoid needing supports.

Mug Holder Insert v2.5.stl

Insert for my couch cup holders to make it possible to have a coffee mug/tea cup in the spot. Also useful for my kid's small cups that disappear in to the cup holder.

Mug Holder Insert v4.stl

I have some telescoping grow lights which stand on a tripod base I use to grow plants on a small bookshelf. Unfortunately the light height is still limited so I designed these brackets to mount the lights on the top of the bookshelf and gain additional height.

Grow Light Bracket 2.0 v7.stl

Jack-O-Band TPU Wristband (Plain Base).stl

Witches_Ghosts_Bats TPU Wristband.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sacrasang3d

Achievements

Seedling

Explorer

Debutant

Pinned models

Cool S.stl

Cool S Saber

Cute Halloween TPU Wristbands

Cool S Vase - 2 Layer V2.stl

Cthulhu Sign.stl

Squat Rack Safety and J Hook TPU Caps

E5 Panel Insert.stl

Spool Holder and Desiccant Box

Oven Hexaknob

Cute Halloween TPU Wristbands

Cool S Saber

Cool S.stl

Elbow Saver v2.stl

Mug Holder Insert v2.5.stl

Grow Light Bracket 2.0 v7.stl