Cool S Vase - 2 Layer V2.stl

Can print in vase/spiralize mode with probably any nozzle size. I printed mine with a 0.6mm nozzle in Eryone dual extrusion silk PLA. Scale as you please.

There is a single layer version, two layer version 1 is a straight stack and slightly taller than the two layer version 2 where the second layer is rotated slightly (photographed print).

If intended for use as a pot I do not recommend vase/spiralize mode. Instead use multiple walls, 0% infill and 0 top layers. For a drainage hole a negative modifier in your slicer is all you need :)