Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!

Want a drawer under your desk, workbench, or countertop? With this fairly simple project, printable on most full size printers (~250mm build plates), you can print and assemble your own custom drawer in no time! There's a minimum of 7 pieces to print: 2 rails, 3 connectors, 2 drawer parts, then you can choose to print as few or many of the dividers as you need for organization. Installation is straightforward with a power drill, pencil, and patience.

Dimensions:

• Completed Drawer: 334 x 75 x 248 mm (~13 x 3 x 10 in)

Printed Weight: (PETG)

• ITEM 1: ~810g (including 8 dividers)

Additional Items: You will need 8x M3 screws that are shorter than your desk/countertop thickness

PRINTING:

• For best results, print using the provided 3mf file
• Clean your build plate! "Flat" models like this are more likely to shrink and peel up.
• Print with 7 bottom & top shell layers, 4 walls, ~20% infill

‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.