I don't know if it fits other action camera mounts as there is no way to check it.
Recommend a minimum of 25 percent density.
It is possible to print freely with a filament thickness of 0.3 mm
The dimensions are adjusted for printing with a rough surface of the outer parts only.

**This product is for private use only without the right to manufacture for sale. If you wish to obtain the right for future sales of the product, please contact me to discuss the matter.**

1) The Handler "Black-Cooper SL" for action camera GoPro
		Material: black handle made of PET-G, copper tips made of PLA
		Size: 207x40x30 mm / Package 14x9x2 in.
		Weight: ± 105 grams / 1lbs

2) The Handler "Black-Orange SL" for action camera GoPro
		Material: completely made of PET-G
		Size: 207x40x30 mm / Package 14x9x2 in.
		Weight: ± 112 grams / 1lbs

3) The Handler "Gray-Green SL" for action camera GoPro
		Material: completely made of PLA
		Size: 207x40x30 mm / Package 14x9x2 in.
		Weight: ± 96 grams / 1lbs

Hand Grips for GoPro V1_2.stl

04 All parts Hand Grips for GoPro V1_2.stl

Introducing to Flobber enthusiasts and holders an additional backup case for storing and relocating the Flobber 9mm ammo case with you.
After printing, I recommend that the screw-shaped parts be lightly oiled and that the lid be effortlessly cranked a few times.
I also recommend a fill volume of at least 30 percent.

**Only for personal production without mass sales for publicity.**

Reserve cartridge case for Flaubert 9mm.stl

04 Combined body and cartridge case V1.stl

Printing recommendations.
The product was made on the basis of PLA material “AURAPOL” color SILVER

The settings for ELEGOO Neptun 4 Max printer were used:

	Nozzle temperature ......................................... 225С
	Table temperature ............................................. 60С
	Print layer height .............................................. 0.3 mm
	Line width ....................................................... 0.42 mm
	Number of wall lines (recommended) .......... 1-2
	Number of bottom layers (ideal) ..................... 4
	Filling density (sufficient) ............................... 15 %.
	Fill layer thickness (recommended) ............. 0.3 mm
	Printing speed (recommended) ............... 90 - 100 mm/s
	First layer speed ................................................. 60 mm
	Fan speed ........................................................... 20 %

Printing time was approximately .............. 2 hours
Material consumption approx. ................ 51 grams / 17 meters
Cost of production in the order of (max) electricity + material ............ 1.2 Euro 

Kitchen appliance holder V1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SL-Tools

Achievements

Seedling

Hand Grips for GoPro V1_2.stl

Reserve cartridge case for Flaubert 9mm.stl

Kitchen appliance holder V1.stl