Printing recommendations.
The product was made on the basis of PLA material “AURAPOL” color SILVER
The settings for ELEGOO Neptun 4 Max printer were used:
Nozzle temperature ......................................... 225С
Table temperature ............................................. 60С
Print layer height .............................................. 0.3 mm
Line width ....................................................... 0.42 mm
Number of wall lines (recommended) .......... 1-2
Number of bottom layers (ideal) ..................... 4
Filling density (sufficient) ............................... 15 %.
Fill layer thickness (recommended) ............. 0.3 mm
Printing speed (recommended) ............... 90 - 100 mm/s
First layer speed ................................................. 60 mm
Fan speed ........................................................... 20 %
Printing time was approximately .............. 2 hours
Material consumption approx. ................ 51 grams / 17 meters
Cost of production in the order of (max) electricity + material ............ 1.2 Euro
