You need: 8 Plates. 32 Pins. 12 Connectors. 8 Gears
Print settings: Nothing needs supports.
Tipps: I printed it in to colours: The pins and the Plate in one colour and the Geas and the connectors is another colour. You can also use your textured PEI for this. The Gears top sodes lay on the bed and will get the petting from the build plate.
Assembly: First follow this Video: https://youtu.be/6X1xqOo89sM?si=tCD3NEvwfVsDbR-6 Then this one: https://youtu.be/OFO_lbbcTpc You will be left with the Gears and a few Pins. Assemble them like in the following Video, but the difference is that the Pin needs to be clipped though the Plate from the inside and then into the Gear on top of the outside of the Plate.
Categories:
36 Likes293 DownloadsJuly 1, 2024