.png&w=3840&q=75)
Greetings!
I'm excited to present you with my Baseball Desk Lamp.
Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, however, that the components are compatible only with a specific Lamp Socket available on eBay.
EU Version:
EU Plug: https://ebay.us/ASMco5
EU Bulb: https://ebay.us/yB4Acp
US Version:
US Plug: https://ebay.us/yHsc2c
US Bulb: https://ebay.us/oTWuS1
Support my work by purchasing through these links!
On to the print settings: For this project, you only need to print the files which are numerically labelled.
Baseball: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!
Holder: Unlike the Baseball part, you'll need to print the holder with supports.
Voila! Your Baseball Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!
In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.
Please keep in mind that this design is intended for non-commercial use only.
Enjoy lighting up your workspace with your very own Baseball Desk Lamp!