Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223351.

This is a basic pencil cup. That's it. If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Basic Pencil Cup (Customizable)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223343.

This thing was made to hold my glue gun (https://www.dollartree.com/crafters-square-hot-glue-guns/337166). It is meant to be bolted to the edge of a workbench. it has 2 sides, one for dripping glue, one for extra glue sticks. To bolt it to bench drill holes to whatever the diameter of your screw is. (Designs on side I added after the fact, if you want to do something similar, I left the step file below) If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Hot Glue Gun Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5593323.

This is a box that I made for one of my high school level classes and was very proud of, so I thought I would post it on Thingiverse. One thing to be aware of is that to make the hinge of the non 3D printed hinge, you will need a paper clip. You will also need to make both the Cool Box Lid file and the Cool Box Top Layer file, making fully 3D printed version, use the Cool Box Top Layer With Lid file. Lastly if your printer is TOO precise and good (which props to you if it is) then use the pins in the files area to hold the arms on. Hope you like it as it took lots of time to design and print. If you feel so compelled to support me, join my Patreon (patreon.com/3DPrintingProjectUnKnown). No matter your choice thank you for taking a look and I hope you like the end product. If making this you will need to purchase 4mm x 2mm magnets (These are the ones I used: tinyurl.com/4mmx2mm-magnets). Please also be aware that I have not tested the paper clip version of the hinge so please tell me in the comments if it works! As always the step files are in the files area. Enjoy!!

Magnet Box with Tackle Box Style Hinge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223425.

Please give me feedback in the comments! Print one lid and one main body. Push parts together to close box. To seal, put tape around edges. To open, peel tape. Simple as that! In the future I plan on making a version for 2x2 and 4x4. If you want a customized cube box for a different cube, please send me a comment. If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Rubik's Cube Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5223354.

It's a Jewelry cup. That's it. If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Jewelry Cup

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5227909.

Basic stand that you can make your own (using the step file). If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Glasses Stand (Customizable)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852516.

This is ment be able to be adapted to any box, just take a length of 1/2 in dowel and cut it to length of the BOTTOM of the box. You are going to need to print 2 of the connectors, one for either side. The 2 extra holes on the bottom are for the legs, which are also 1/2 in dowel. All you need to do for the legs is make sure that the filament will fit in the box, on the dowel and that the legs are half way up from the bottom. Then it should work great! If you want to help support me, please go to this link: patreon.com/3DPrintingProjectUnKnown. Thank you for your support in making these projects possible!

Roprint2

Achievements

Seedling

Novice Maker

Pinned models

Rubik's Cube Container

Magnet Box with Tackle Box Style Hinge

Basic Pencil Cup (Customizable)

Basic Pencil Cup (Customizable)

Hot Glue Gun Holder

Magnet Box with Tackle Box Style Hinge

Rubik's Cube Container

Jewelry Cup

Glasses Stand (Customizable)

Removable filament holder