Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5593323.
This is a box that I made for one of my high school level classes and was very proud of, so I thought I would post it on Thingiverse. One thing to be aware of is that to make the hinge of the non 3D printed hinge, you will need a paper clip. You will also need to make both the Cool Box Lid file and the Cool Box Top Layer file, making fully 3D printed version, use the Cool Box Top Layer With Lid file. Lastly if your printer is TOO precise and good (which props to you if it is) then use the pins in the files area to hold the arms on. Hope you like it as it took lots of time to design and print. If you feel so compelled to support me, join my Patreon (patreon.com/3DPrintingProjectUnKnown). No matter your choice thank you for taking a look and I hope you like the end product. If making this you will need to purchase 4mm x 2mm magnets (These are the ones I used: tinyurl.com/4mmx2mm-magnets). Please also be aware that I have not tested the paper clip version of the hinge so please tell me in the comments if it works! As always the step files are in the files area. Enjoy!!