Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5175525.

This is an over engineered mitten and boot dryer for use over a forced air furnace vent measuring 14 inches by 6 inches (350mm X 150mm).  Each tube can be turned on or off and has a unique air flow path forcing air out into the mitten but allowing a path for wet return air to exit.

Twist clockwise to turn on and counter clockwise to turn off, this allows only some of the tubes to be covered at one time.  A visual indicator window users to check the status.  An optional MMU version of the support tube allows the addition of color to the visual indicator.

All pieces print support free.  I recommend PETG or some other higher temp plastic as PLA may warp.  Printing at 0.3mm layer height with a 0.6mm nozzle will also save a lot of print time.

Four small M3 self tapping wood screws or similar are need to assembly the two halves of the base.  The support tubes screw into the base and the dryer tubes click into the support tubes.

This design was inspired by the [Mitten Monster (Mitten Dryer)](https://www.thingiverse.com/thing:4032813) by [miragec](https://www.thingiverse.com/miragec/designs).

**Updates:** 
2021Dec30 - Add a version of the Dryer tube with a thicker tip for higher traffic areas.  I noticed one of mine right next to the cold door broke due to contact with a stray boot or some suck.

Mitten & Boot Dryer for In-Floor Vent - NO SUPPORTS

Robagon_VentDryer_Assembled.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2987734.

**Multi-color and Landable Flat Top Treasure Chests available on my [Gumroad Store](https://gumroad.com/robagon3d).**

Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming.

Tile Count: 6 Gold, 6 Silver

Pick your favorite, I'm going to try wooden for silver and strapped for gold.

Note: It appears thingiverse won't render the strapped versions as they are to large a file size. Please see photo.

Treasure Chests for Gloomhaven

I am an engineer with an interest in design for 3D printing, including table top miniatures and terrain.  I am posting on printables.com mostly these days.

bio.link/robagon3d

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Robagon3D

Achievements

Sapling

Fan Favorite

Explorer

Mitten & Boot Dryer for In-Floor Vent - NO SUPPORTS

Treasure Chests for Gloomhaven