Chris W

Japanese Dragon Castle

by
RetroMaker
Follow
Follow
Remix Model
RetroMaker
RetroMaker
|
|
Image 2 of 4
Japanese Dragon Castle - Optional configuration with only one balcony. - 3d model
RetroMaker
RetroMaker
|
|
Image 2 of 4
Japanese Dragon Castle - Optional configuration with only one balcony. - 3d model
2D
3D
Makes
Japanese Dragon Castle - Printed at 50% scale with 50% scaled Built over Bot Dragons! - 3d model
Japanese Dragon Castle - Optional configuration with only one balcony. - 3d model
Japanese Dragon Castle 3d model
Japanese Dragon Castle - Printed on a x1c I plan on adding levels to make a tall display.  Best dragon display I have seen. - 3d model
This model is restricted by licensing terms. 

This medieval style Japanese castle can be the home to your articulated dragons or other mini figures used in tabletop role paying games. Inspired by new articulated Cherry Blossom Dragons from Built Over Bot this miniature 5 part castle tower stacks together to create a storage unit for your dragons in all sizes. The bottom level holds long and medium length dragons. There are multiple floors and balconies that will house the different sized dragons. Overall height is 14" and the base footprint is 6"x6".

I've included multi-color .3MF files for this project or you can use the .stl files to print one color.

Section 1 - Print at 0.2mm layer height, 5-10% infill with supports on the doorway and windows for the overhang.

Section 2 - Print at 0.2mm layer height, 5-10% infill with organice tree supports 20% overhang threshold

Section 3 - Print at 0.2mm layer height, 10% infill, no supports

Section 4 - Print at 0.2mm layer height, 10% infill, no supports

Roof Section - Print at 0.2mm layer height, 5-10% infill, no supports, 1.2mm brims for the roof edges.

Floor 1 - Print at 0.2mm layer height, 20% infill, no supports, filament swap colors at 1.0mm layer height

Floor 2 - Print at 0.2mm layer height, 20% infill, no supports, filament swap colors at 1.0mm layer height

Cherry Blossom Flower - Print at 0.2mm layer height, 20% infill, no supports. 0.0mm - 2.8mm Dark Pink 3.0mm - 4.2mm Light Pink 4.4mm - end Dark Pink

Creative Commons License 4.0 BY-NC-ND A commercial license to sell these prints any many others is available by subscribing to my Thangs Commercial Partner membership plan.


169 Likes187 DownloadsJanuary 26, 2024


169 Likes187 DownloadsJanuary 26, 2024
This model is restricted by licensing terms.