Select a membership plan

Model is included in this plan
Available now

20% off
RAF Starter Download Plan
$5.00
/ month
when billed annually
✅ Welcome pack: 5 FREE models

This Starter Plan gives you access to a broad subset of the RAF catalog of 1:144 WWI aeroplanes and accessories for personal use only.

The Starter Plan allows up to five monthly model downloads. If you do not use them all, you can roll over up to two unused downloads into the next month. You also get a "Welcome Pack" of three of the most popular WWI fighters and two types of plane pegs.

The Starter Plan will include all of the most common and popular varieties of WWI planes in our catalog. For instance, this plan will include the standard late-model Sopwith Triplane. Variants such as the early-model Sopwith Triplane and a two-gun Sopwith Triplane will only be available in the higher-tier plans, e.g. Silver.

Reduced Aircraft Factory LLC has been making 3D models for WWI aircraft since our start with Shapeways in 2012. The models are all built with 1mm thick surfaces and "wires" (like struts). The designer makes no claim or warranty about the suitability for the 3D digital file to be printed on any particular 3D printer or to be correctly handled by software associated with 3D printers, including 3D digital file verification and slicing software. While the 3D model was designed for optimized for use on industrial printers with 1mm wall and wire thickness minimums, there will be portions of each model that do not meet these minimums, including rounded surface edges and small surface details like engine air intakes. All models have been verified against holes, flipped triangles, bad edges, bad closure, and the like.

GENERAL OVERVIEW OF THE LICENSE As a subscriber to a Reduced Aircraft Factory Plan on thangs.com, you are authorized to:

  • Print and use the 3D prints of the 3D model for private use;
  • Share the images of your 3D prints of the 3D model on communication media such as social networks or websites, both painted and unpainted.
  • Modify the 3D model to adapt it for personal use only. Adaptations are derived works and retain the same license and privilege as the original.

What is disallowed:

  • No distribution, sale, donation, exchange, commercial use, sales, or public sharing of the 3D digital files or licensed 3D model, whether in original or modified form;
  • No commercial use or sales of 3D prints from the licensed 3D model, whether in original or modified form.

For the full license text, or if you have any questions on the "RAF on Thangs" license, or if you'd like to inquire about a commercial license, send an email to raf@poeland.com.

Model is included in this plan
Available now

50% off
RAF Silver Download Plan
$15.00
/ month
when billed annually
✅ Welcome pack: 5 FREE models

This RAF Silver Plan gives you access to the full RAF catalog of 1:144 WWI aeroplanes and accessories for personal use only.

The Silver Plan allows up to twelve monthly model downloads. If you do not use them all, you can roll over up to six unused downloads into the next month. You also get a "Welcome Pack" of three of the most popular WWI fighters and two types of plane pegs.

Reduced Aircraft Factory LLC has been making 3D models for WWI aircraft since our start with Shapeways in 2012. Eventually there should be over three hundred models to choose from. While the catalog is of limited size currently, new models are added frequently, limited only by the designer's time constraints. In the early months, we hope to see five to twenty new models added every week (but sometimes real-life interferes with such plans).

The models are all built with 1mm thick surfaces and "wires" (like struts). The designer makes no claim or warranty about the suitability for the 3D digital file to be printed on any particular 3D printer or to be correctly handled by software associated with 3D printers, including 3D digital file verification and slicing software. While the 3D model was designed for optimized for use on industrial printers with 1mm wall and wire thickness minimums, there will be portions of each model that do not meet these minimums, including rounded surface edges and small surface details like engine air intakes. All models have been verified against holes, flipped triangles, bad edges, bad closure, and the like.

GENERAL OVERVIEW OF THE LICENSE As a subscriber to a Reduced Aircraft Factory Plan on thangs.com, you are authorized to:

  • Print and use the 3D prints of the 3D model for private use;
  • Share the images of your 3D prints of the 3D model on communication media such as social networks or websites, both painted and unpainted.
  • Modify the 3D model to adapt it for personal use only. Adaptations are derived works and retain the same license and privilege as the original.

What is disallowed:

  • No distribution, sale, donation, exchange, commercial use, sales, or public sharing of the 3D digital files or licensed 3D model, whether in original or modified form;
  • No commercial use or sales of 3D prints from the licensed 3D model, whether in original or modified form.

For the full license text, or if you have any questions on the "RAF on Thangs" license, or if you'd like to inquire about a commercial license, send an email to raf@poeland.com.

Daryl P
Follow
1:144 Bristol Scout D 3d model
1:144 Bristol Scout D 3d model
1:144 Bristol Scout D 3d model
1:144 Bristol Scout D 3d model
1:144 Bristol Scout D 3d model
1:144 Bristol Scout D 3d model

1:144 Bristol Scout D

Digital download
This model is restricted by licensing terms. 

This is a paintable 1:144 scale model of a Bristol Scout D with a synchronized Vickers gun. Also available is a Bristol Scout C with a top-wing Lewis gun. Since many painters choose their own mounting system, no peg is included on the plane. Pegs can be purchased separately in the Accessories section of this catalog.

The Bristol Scout was a pre-war racing design with simple and handsome lines. For clarity, the prototype was given the name Bristol Scout A. The first two production machines, named the Bristol Scout B, were sent to France as quickly as they cleared testing, they differed in only minor ways from the original.

The next order of twelve scouts for the RFC and twenty-four for the RNAS became the Bristol Scout C, and after the first batch was delivered in March 1915, a second order for seventy-five was placed. They differed little from the Type B -- the main visible change being the removal of stiffening ribs from the engine cowl. As was common at the time, the were scattered among many squadrons in small numbers and mixed with other scouts and two-seaters. Planes with Gnome engines were reserved for the RNAS because the engine they were more likely to be flying over water and the Gnome was thought to be more reliable than the Le Rhône. Partly through Production of the Type C a widened tail was fitted and the dihedral was increased to 3 degrees.

Eighty Bristol Scout Ds were ordered by the RFC in late 1915 for the RFC. The Type D had shorter ailerons and increased dihedral and the Le Rhône engine. Late production RNAS Type Ds used the 100hp Gnome Monosoupape engine, but vibration problems forced the final twenty RNAS Type Ds to revert to the 80hp Gnome.

While most Scouts were delivered unarmed, various jury-rigged guns were mounted, and Scouts built for the RFC in 1916 used a synchronized Vickers machine-gun with the Challenger or Scarff-Dibowski interrupter.

Eighty RFC Scouts were sent to France in total, and they served through summer 1916, after which they were repurposed as trainers. Thirty-two went to the Middle East, nine to Home Defense, and 115 went straight to flight schools. The early piecemeal distributions of Scouts can be illustrated by unit strength in September 1915 when seven Squadrons had one Scout each and No.8 had two.

For more data and gaming info on this plane, see https://linen.miraheze.org/wiki/Bristol_Scout.


Discussions

1:144 Bristol Scout D

0 downloads · 3 months ago in 
Daryl P
Follow
Digital download
This model is restricted by licensing terms.