Stabby Ducky Pint Holder and Container 3d model

Stabby Ducky Pint Holder and Container

93 downloads · 7 months ago · Meet the Stabby Duck Pint Holder, the feisty little bird who’s ready to guard your ice cream with it

This model is restricted by licensing terms.

View license.

Description

Meet the Stabby Duck Pint Holder, the feisty little bird who’s ready to guard your ice cream with its life… or at least with a very dramatic plastic knife. This chunky, grumpy duck is designed to hold a full pint snugly inside its round belly, keeping your hands warm and your ice cream cold. With bold orange feet, a pouty beak, and an expression that says “touch my treat, and we fight,” this holder is equal parts adorable and hilarious. Perfect for gifting, collecting, or enjoying your favorite pint with a side of attitude!

Instructions!!!! Read me!!!! Or don't....

This handled version is set to a gelato container in the 3MF. - For all STL users, it is 92%. If you are doing the cardboard-style ice cream pints, it should be 95%. Mine varied in size depending on the brand.

To try and get the size you need, there is a measuring device in the slicer. The little ruler that is next to the paint bucket. Put one dot on either side of the opening to see the sizing.

The 3MF version has a negative cylinder added to the duck with the handle. It makes it easier to get the container out of the duck. STL users, you will have to right-click the duck container and add a negative part in the slicer to have this.

The eyes - The flat part that is touching the plate....that touches the eyebrow, and the rounded part of the eye goes inward.

I used supports on the handle...you probably don't need to, but it made me feel better. Do as you wish.

Painted 3MF and STL included. Please double-check that the settings are compatible with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.

Printing Recommendations: Initial layer and initial fill: 25 mm/s Layer Height: 0.20 mm Walls: 2-3 Infill: 5-15% Gyroid Supports: Container without Handle is Support Free - With Handle - Might Need a Support (Set in 3MF) Cooling: Let the plate cool completely before removing your print to avoid warping or damage. Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law.

Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form

No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved.

Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.