.JPG&w=3840&q=75)
**Please note: This is just the top piece, the wardrobe is in a separate file. ** Painted 3mf included for the gingerbread dragon. Verify settings; what works for me may not necessarily be the correct setting for your printer.
The tree, Gingerbread Dragon, and small present require support. If you choose to do the hollow tree, I highly recommend organic tree supports, otherwise, it may be challenging to remove support material.
For the small present; I utilized standard supports, unchecked support on the build plate only.
The big present is hollow to hide a light battery pack inside for any battery-operated lights you may be decorating with.
Printing recommendations: .20 Layer Height 2 - 3 walls - 15% infill Brim may be required on the bottom of the tree and bows for better adhesion.
**Assembly: ** I utilized the wall poster putty to put the pieces together. You could also use glue for the bows and presents. I would utilize the putty or double-tape to hold down the presents and tree to the wardrobe.
Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on either Patreon or Thangs.
More designs are coming soon! Check out my socials and give a follow to keep up to date.
Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.