This is a universal sealing clip for every kind of bag. It's designed to be very easy to print. 

There are no overhangs in the hinge design and all angles are 45°. There is no need for support as well. I recommend a layer height of 0.24mm and at least 3 outer walls. Infill is not needed. There are two teeth with sharp points for a water tight sealing.

For every size there is an additional "closed" version. This version is not folded open and has a bit worse tolerances, so you can fit the clip on to your build plate. You will need to print this version with a raft to prevent elephant feet.
If possible I recommend to use the non closed version.

The sizes are named by their actual usable length.
If you can't find the size you like, just write it in the comments.

50mm ≈ 2in
100mm ≈ 4in
150mm ≈ 6in

If you have a special wish like a longer version or an engraved name, you can contact me at rean.schuette@ewetel.net as well.

100mm_closed_seailing_clip

100mm_closed_seailing_clip.stl

75mm_closed_seailing_clip

75mm_closed_seailing_clip.stl

50mm_closed_seailing_clip

Bag Clip - Sealing Clips - Easy to print - without overhang & support

100mm_sealing_clip

100mm_sealing_clip.stl

50mm_sealing_clip

50mm_sealing_clip.stl

150mm_closed_seailing_clip

150mm_closed_seailing_clip.stl

75mm_sealing_clip

75mm_sealing_clip.stl

150mm_sealing_clip

150mm_sealing_clip.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Rean S

Achievements

Seedling

Fan Favorite