tracking pixel

Order summary

Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray

Price$4.50
Sales taxEnter address for total

Add promo code

Total dueEnter address for total

Powered by

Payment details

PayPal
Card
By confirming your purchase, you allow Thangs to charge your card for this payment in accordance with their terms.
Rasmus H

Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray

by
RasmusHelbo
Follow
Follow
Remix Model
RasmusHelbo
RasmusHelbo
|
Image 1 of 4
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
RasmusHelbo
RasmusHelbo
|
Image 1 of 4
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
2D
3D
Makes
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
Hana Planter Pot, Striped | Small, Medium, Large | Self Watering and Drip Tray  3d model
This model is restricted by licensing terms. 

Create your own 3D printed planter with this STL file, designed with a unique water level indicator.

It comes in 3 sizes: Small - 61.6-71 mm inside diameter Medium - 75.6-85 mm inside diameter Large - 90.6-100 mm inside diameter

There is both a drip tray and a self watering version with a wicking system. For the self watering with a wicking system. All you need is some kind of string/rope. I use 4 mm nylon paracord.

The self watering planter features a ridge that shows you how much water to pour. This is a design feature, instead of having the small holes at the top, like other self watering planters. You just pick up the inner/top part, and then pour the water.

To make sure the outer part is watertight, you can try some of these settings:

  • Extrusion Multiplier: Around 1.1
  • Layer Parameters: 3-4 top and bottom layers
  • Infill: 100% (I would try and avoid this unless necessary, since you will end up using a lot of filament. Alternatively, you can make just the bottom 100%)
  • Temperature: Increase nozzle temperature or reduce cooling for better layer adhesion

I welcome your feedback and suggestions. Enjoy creating your perfect indoor garden with this stylish and functional planter!


0 Likes0 DownloadsOctober 29, 2024


0 Likes0 DownloadsOctober 29, 2024
This model is restricted by licensing terms.