This skateboard deck display mount 

Uses M5 hex nuts that should be heat pressed in for longevity 
Mount using [25mm M5 screws (or up to 50mm)](https://amzn.to/3X4pUVO) to thread into the model for additional support
Recessed slot on back for a flush wall mounting using [medium 12lb. command strips](https://amzn.to/3T3LpF4)
Added a Girl Skateboards logo for fun!
No supports needed. Slot bridges fine without.

[Remix of model from RaptorRL18](https://www.printables.com/model/768308-skateboard-wall-mount)

Skateboard Deck Wall Mount with Med. Command Strips

Skateboard Mount No Logo.3mf

The Slope Planter with hidden "Pig Nose" drip tray is a unique design that allows the fluted design to shine through without seams. The hidden drip tray twists on a gets its name because it looks like a pig's nose. 

**_Size_**
3.5" (90mm) Outer Diameter
3.4" (86mm) Height
2.75" (69mm) Inner Diameter

**_Print Settings_**
15% infill
2 outer walls.
No supports needed

**Become a member on Thangs**

With this membership, you're granted commercial rights to produce and sell physical copies of these designs.

©Product Print Lab. The STL files bought individually are solely for personal use. It's illegal to resell these digital files without authorization, and such actions may lead to legal consequences. To legally sell physical copies of these designs, you must acquire the commercial license as previously mentioned.

Adhering to this copyright policy safeguards intellectual property, backs the creators, and upholds the values of the 3D printing community.

Slope Planter with Hidden "Pig Nose" Drip Tray

Slope.3mf

This magnetic Mario Question Mark Block is the ultimate desktop fidget spinner. The base block and spinning panel is the core to a lot of different spinning designs. The Mario ? Block is the first in the series and released exclusively on MAR 10 (MARIO).

The print file includes the following"
1. (4) ? Box Panels
2. (1) Plain Top Panel
3. (1) Bottom Spinner Panel
4. (4) Question Marks (Printed separately for the highest quality)
5. (1) Inner Base Magnetic Box
6. (2) Magnet Alignment Jigs
7. (1) Question Mark Alignment Jig (used as a base to support the question mark panels if  the question marks are installed prior to the magnets.

I prefer to print the question marks separately and press them into the panels to achieve the highest quality prints and reduce the amount of filament switching during the print. 

No glue is needed to install the magnets, they can be hammered in with the jigs

Not included:
(48) [4x2 Neodymium magnets](https://amzn.to/3VcZSAu)
(1) [22mm skateboard bearing](https://amzn.to/439ULCW)
(8) [4x2 Neodymium magnets](https://amzn.to/3VcZSAu) (Used for jigs)

Mario Magnetic Spinning Question Mark Fidget Block 

Question Mark Box Generic.3mf

This is a holder for the [Domsanistor Handheld Vacuum Sealer Machine](https://amzn.to/48QL7qd) for the IKEA Skadis/SKÅDIS pegboard. The vacuum sealer is used to seal [Reusable Sous Vide bags](https://amzn.to/49JBZVK). I use these bags to keep my filament dry.

The vacuum is mounted upside down in the holder due to the taper in the body of the vacuum. There is a 20mm hole in the bottom of the holder to allow for activation of the vacuum while in the holder if need be. 

This model has a 50% grid infill for sturdiness and is printed with 3 small tree supports under the tabs that are used for mounting on the pegboard.

_*Affiliate links used above._


IKEA Skadis Domsanistor Vacuum Holder

Skadis Vacuum Generic v3.3mf

This [LG UltraFine 5K Monitor](https://www.lg.com/us/monitors/lg-27md5kl-b-5k-uhd-led-monitor) Height Lock will prevent the display from sagging when the spring ages

LG Ultafine 5k Monitor Lock.3mf

Journey TRIO Light Blocking 3-piece Colorways add style and functionality to your @thejrnyofficial TRIO 3-in-1 Wireless Charging Station.

While adding a touch of color to the station, the bottom ring blocks the flashing charging light that can keep you up at night.

[Purchase fully printed version ](https://projectprintlab.gumroad.com/l/journey-trio-colorway)

Journey TRIO Light Blocking 3-piece Colorway

Journey Kit.3mf

A simple magnetic bit holder for the [3DZWMAN Vertical Heat Press](https://amzn.to/3T4OPYK) bits. 

Utilizes 2 - [10x3mm magnets](https://amzn.to/3uGHJA7) (optional) which affix the holder to the press bed.

*Affiliate links used

Magnetic Heat Press Bit Holder

Magnetic Press Bit Holder.3mf

This planter was inspired by Joe Willis' parametric spiral vase. I added a twist lock drip tray

Spiral Succulent Planter with Locking Drip Tray (3.5")

Twist-Lock-Tray-Planter.3mf

Helvetica Neue Letter Kit - 30mm Included characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!@#$&?

Helvetica Neue Letter Kit - 30mm

Helvetica-neue-letter-kit-30mm.3mf

This unique filament swatch design has a dedicated spot for a 12mm QR code that can be attached mid-print, enhancing its practicality. Our design requires pausing the print at the 7th layer to ensure seamless attachment of the QR code. Built for high precision, our design necessitates printing the QR code at 12mm size within a 15mm boundary. The QR code can be set to link to anywhere, we link to the filament purchase page for easy reordering.

Filament Swatch with QR code

swatch_with_qr.3mf

Tiered Heart Planter with Drip Tray 
- Drip Tray fits on both the large and small heart
- Also fits as a lid on the small heart

A perfect gift for Valentines Day
Doubles as a candy dish and pen holder, perfect for a receptionists desk

Dimensions:
9.5" wide x 7" deep x 3.5" tall with tier, 2" tall without tier

Heart Planter.3mf

Home goods and other objects you can print and sell.

Full Access

Project Print Lab: solving everyday problems with practical 3D printing solutions. Follow for innovative ideas and tips.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ProjectPrintLab

Select a membership plan

ProjectPrintLab

Achievements

Seedling

Trailblazer

Pinned models

Journey TRIO Light Blocking 3-piece Colorway

Mario Magnetic Spinning Question Mark Fidget Block

Slope Planter with Hidden "Pig Nose" Drip Tray

Skateboard Deck Wall Mount with Med. Command Strips

Slope Planter with Hidden "Pig Nose" Drip Tray

Mario Magnetic Spinning Question Mark Fidget Block

IKEA Skadis Domsanistor Vacuum Holder

LG Ultafine 5k Monitor Lock.3mf

Journey TRIO Light Blocking 3-piece Colorway

Magnetic Heat Press Bit Holder

Spiral Succulent Planter with Locking Drip Tray (3.5")

Helvetica Neue Letter Kit - 30mm

Filament Swatch with QR code

Heart Planter.3mf