Come on let's be real. How many Benchys you have around? Yeah I figured. I am sure that they are just lying around...

Well this bundle of 3 different Benchy decoration that is about to change! Now you will be able to give the Benchys printed a better decorative look (specially your fist one in a new printer for example). This is an amazing print that will give a great touch on your 3d printable collection!

**In the files you will find:**
-The: Little wave decoration
-The Tsunami! decoration
-The: Oh S**t! KRAKEN! decoration
- EXTRA for THANGS DOWNLOADS: The tentacle on moving seas decoration. (this model is not featured as a picture and it is only to be found by the people that download the bundle. Little gift for you guys ;)

If you want to see this design in action Click the link ▶️:
https://www.instagram.com/p/C_s-E8yNsax/?hl=en

Drop a like💜, comment 💬 it really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

**Recommended settings:**

MODEL IS NOT SCALABLE, LEAVE IT AS IT IS FOR FITMENT ISSUES!

Layer height:
-0.2 mm is perfect

-NO SUPPORTS ARE NEEDED FOR ANY OF THE MODELS

-No extra adhesion to the bed is needed

-Infill: between 5 - 10% is more than enough. I printed mine with 5%

Benchy Boat Decoration Bundle

Benchy_Decoration_Style_3(Octopus).3mf

Are we dreaming?

Well.. now you have a way to check it with this awesome look alike inception totem. Similar style to the one used in the film!!

This one is designed to be a little Fidget to have on the desktop and make it spin endless times. It has an incorporated magnet (one at the base and another one at the totem) so it stays on the same spot while spinning. No one will know about the magnets, trust me ;)

It also works on any other surfaces if you do not want to use the base provided.

IMPORTANT: If you are not using a Bambulab Printer use the files with NO_PAUSES name. It seems that Cura slicer does not open the files with the pause setting.

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/ :)

**Recommended settings:**

-For this print it is recommended the use of magnets for weight and stability for the rotation of the totem. This print uses two 10x3 mm magnets for the base and the totem. The STLs have the pauses incorporated so you can add the magnet mid print and let the print continue to hide them!

-NO SUPPORTS NEEDED FOR ANY PART!

-MODEL IS SCALABLE but keep in mind the gaps for the magnets!!

-Adhesion: Nothing is needed.

-Layer height: 0,2 mm is more than enough

-Infill: 10 % is more than enough

INCEPTION MAGNETIC ROTOR

1.-Rotor_handle_no_pauses.stl

<p dir="ltr"><span style="white-space: pre-wrap;">Halloween designs coming out soon ;)</span></p>

Get ready!

Unlock all of the Printplay3D models posted!

**Features:**
Discover a wide range of models suitable for beginners to advanced builders and printers. In this plan you will find multiple types of models, from switch dockers, articulated prints and many others!
Members will have 3 downloads per month on all the models I post, choose wisely!

**Benefits:**
Enjoy new models ensuring your creative pursuits stay fresh and exciting. 
Subscribe today and start building your creativity!

**Other information:**
- All my models are printed before upload to make sure the piece is as intended!
- Feel free to drop me a message on Instagram if something is needed (Instructions, custom parts, custom modifications etc..)
- **IMPORTANT: ALL of the models are for private use only**

Printplay Models!

1.-Rotor_Handle_with_pauses.3mf

2.-Rotor_Suport_with_pauses.3mf

2.-Rotor_Support_no_pauses.stl

Benchy_Decoration_Style_1(Wave).stl

Benchy_Decoration_Style_2(Tsunami).stl

Benchy_Decoration_Style_4(Octopus_V2).stl

Magnetic bees for kids designed as an activity. The idea is for the kid to match the color of the hive with the correct bee. They will love to play around with them, That I can ensure!

This activity is created for the kid to understand and match the colors without any explanation in a sense of exploring by themselves.

The idea of the magnets is for it to practice the pinching force that is needed to hold a pen/pencil when learning to write! There is a pincher added in the model but I have found that using a metallic one is way better for the little ones!

For this model you will need to use 20 magnets 10 x 4 mm (or smaller) that you can get from Amazon/Temu.

THIS ACTIVTY NEEDS TO BE SUPERVISED FOR SAFETY REASONS!

If you want to see this design in action Click the link ▶️: https://www.instagram.com/p/C-GAmn5N34f/?hl=en
Drop a like💜, comment 💬 it really helps us creators to get more done :D

**Buying this model does not grant access to sell it commercially, just for PERSONAL USE!**

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

**Recommended settings for printing:**

NO SUPPORTS NEEDED FOR ANY PART!

MODEL IS  NOT SCALABLE since it is ready to add magnets (10 x 4 mm) at the bottom of the bees and petals. In total you will need 20 magnets!

Adhesion: Nothing is needed.

Layer height: 0,2 mm is more than enough

Infill: 5 - 10 %. Consider more if younger kids will play with it as the item can receive some damage. 

Post -Process: Bees, flowers and the hive come in parts and will need further assembly. This is super easy and straight forward to do with a bit of fast glue. You may also need to trim some little pieces to make everything fit but it is a super easy process to do!

MAGNETIC BEES FOR KIDS

1.-Wings_eyes_joiner_Bees_(10_units.3mf

2.-Body_Bee_with_color.3mf

3.-Centrer_flower.stl

4.-Joiner_flower.stl

5.-Petal_flower.stl

3.-Hive_Complete_V2_(2cm_heith).stl

Hive_bot_Part1.stl

Pincher.stl

WELCOME TO HALLOWEEN DECORATION PART 1!

Since Halloween is suuper near I have prepared a series of models in order to have an amazing PINTING OCTOBER! 

To start this mini-series I present you my take on the super Famous Jack o'Lantern 

I have prepared 4 different models of faces for this one in order to have a bit or variety when decorating so it does not look repetitive. My personal fav is the one that has the eyes with different sizes by a lot, it simply looks amazing!

This print will use the little electric candles in order to create the light effect! As said, the set up is super easy and it is safe to use everywhere. I got mines from Temu but I am sure you can get them also in Amazon for super cheap!

You will also need 4 magnets 5x3mm per pumpkin in order to close them. This brings new opportunities because you can attach half of the pumpkin (with the candle inside) to ANYTHING MAGNETIC! Just let your creativity flowing, can't wait to see with people come up with!

MATERIAL LIST:
-Electric candle from Temu/Amazon
-4 5x3mm magnets per pumpkin

I used polymaker_3d filaments as always for that amazing final result! Sunrise orange and Army Dark Green just look amazing together don't you think?

Make sure to comment if you would like the same model but to use with real candles! I think it can be also a great addition for your home decor!

Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!

Drop a like💜 really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

MAGNETIC JACK O' LANTERN

1.-Hollow_Pumpkin_Style_1_Fake_Candle(Magnet).3mf

2.-Hollow_Pumpkin_Style_2_Fake_Candle(Magnet).3mf

3.-Hollow_Pumpkin_Style_3_Fake_Candle(Magnet).3mf

4.-Hollow_Pumpkin_Style_4_Fake_Candle(Magnet).3mf

5.-Hollow_Pumpkin_Style_4_Fake_Candle(Magnet).3mf

Hello! I am Printplay3D. I design and Print things, hope you like my models :)
Find me here: https://www.instagram.com/printplay.3d

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Printplay3d

Achievements

Seedling

Designer posts

Get ready!

Pinned models

INCEPTION MAGNETIC ROTOR

Benchy Boat Decoration Bundle

MAGNETIC BEES FOR KIDS

MAGNETIC JACK O' LANTERN

Benchy Boat Decoration Bundle

INCEPTION MAGNETIC ROTOR