Start making money by selling 3D printed models. Sign up to the PrintStart3D Thangs Membership to sell my models in your shop and more!
For more content visit me on Instagram: www.instagram.com/PrintStart3D
Thank you so much for the support <3
grip for bambu lab glue sticks Designed for bambu lab glue sticks The glue stick is fully functional inside of the grenade You may scale to any size glue stick. Just measure the diameter and length of the glue stick and scale with a program like mesh mixer! Easy to print - No supports.
How to use: Push fit the cap of the glue stick firmly into your 3d printed pin and cap section. Insert the twisty side of the glue stick in first through the top of the grenade and push firmly down to set into place. Add a metal ring to the pin and insert into the hole on the side of the clip
If there are any problems with fitment of the cap or glue stick try scaling it up or down only very slightly. Try scaling by 0.5% larger or smaller at a time.
This one is sure to blow your socks off! The Glue stick grip returns in the form of a grenade! Available in 2 different versions.
Now you can add some character to your boring glue stick! The first version is for a glue stick grip to give your 3d printing space some spark ;) The second version will feature no glue stick at all?! This version will be a standalone cosplay prop! I will post it separately on cults3d. Happy printing! Let me know of any questions you have.
3 printed parts total and 1 key ring loop
*This print contains a non 3d printed part. Which is a key ring loop that I had laying around. I will add a 3d printed loop soon for people to be able to create it easier.
3D PRINTING SETTINGS I would recommend using a outside brim of 5mm on the grenade body. 0.28mm layer height
The glue stick should be very snug in the grenade
No supports :)