THIS WAS MADE TO BE PRINTED AT A 250% SCALE. (Makes the final assembled print about 25in long). Parts may not fit correctly if printed larger or smaller.
I created this as a summer project to test my skills at creating a 3d model. I decided that I wanted to make this relatively simple to print and require no glue. I started with the idea that I wanted to make and Iowa class battleship and for the most part that is what this is. Although, I will admit there are some flaws in the model that prevent me from truly calling it that. (Including no propellers and two distinct lines on each side of the hull. One line in the front and one in the back on each side) This is my first true DIY 3d printing project so its not perfect but still looks great sitting on the table. The main guns, secondary guns, back radar, and fire control systems all do turn freely. Once printed everything should fit together without needing much force except for the back smoke stack topper which needs a bit of force. Do keep in mind that there are three superstructure file. That is because the superstructure better printed in pieces after being cut but if the whole thing were cut in a slicer, part of the secondary gun mounts would be cut too. So two extra files where included to fix that and another issue I found on my print. Putting it all together is strait forward and should be no issue. If you do want to print the hull in two pieces there are rods that hold it together that are hidden below the guns.

American Battleship

back hex rod.stp

Back Hull.stp

back Radar.stp

Back smoke stack topper.stp

Fire control.stp

front hex rod.stp

Front Hull.stp

Front Radar.stp

Front Smoke stack topper.stp

hull rods.stp

Main guns.stp

Middle stand.stp

secondary guns.stp

smoke stack.stp

Superstructure piece 1.stp

Superstructure piece 2.3mf

Superstructure whole.stp

Twin Stands.stp

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

PolyCal

Achievements

Explorer

Seedling