.png&w=3840&q=85)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
Symbiote Bottle Holder Supportless
For commercial license subscribe to my Merchant Membership ! Want to sell Plastic3D Prints? Become a Plastic3D Member for exclusive designs, commercial licensing, and early access to new creations!
This symbiote bottle holder has been designed to be printed supportless!
It displays your favourite bottle in style and it's a great accessory to make that bottle a legendary gift!
It can hold various sizes of Wine bottles as well as the unusual Large Chapagne or Prosseco bottles when placed upside down like the one featured in the Picture.
The holder poses best with classical cylindrical bottles and it's designed to accept the ones that are wider in the top part ( incoming pictures)
Geometry prints supportless, we reccomend using silky , transluced or shiny filaments for a better visual impact!
We used a 0.6 nozzle , 0.3 mm layer height and 5-10% gyroid infill for a print under 400grams. and 9hours.
Symbiote Bottle Holder Supportless
Articulated Mammoth — The Ice Age Icon
Articulated Ostrich — The Desert Dasher
Articulated Aquilops — The Ancient Beak
Elephant Seal — The Coastal Cruiser
Articulated Bison — The Tundra Traveler
Elder Earth Dragon — The Rocky Sentinel
Baby Earth Dragon — The Rocky Sentinels
Articulated Pegasus — The Sky Sovereign
Articulated Elephant
Articulated Camel — The Desert Voyager
Articulated Buffalo — The Prairie Monarch
Articulated Flamingo — The Tropical Wader
Articulated Seal — The Harbor Slider
Elder Water Dragon — The Tidal Serpent
Baby Water Dragon — The Tidal Serpent
Articulated Unicorn — The Mythical Guardian
Articulated Horse — The Sleek Stallion
Articulated Peacock
Elder Fire Dragon — The Scorching Sentinel
Hey can you provide some more info about what settings you used that may have contributed to the print time being so much lower than what I'm seeing? I'm using Cura with the default low quality setting (0.28mm) because I don't have a 0.3mm profile made yet and I'm still seeing time estimates that go over one day.
Hello, sorry for the delay!
I would recommend to go with that 0.28 mm layer height profile with 2 perimeters and a 8% gyroid infill. What printer are you using?
I used the stock Bambu Studio 0.3mm layer height profile with 5% gyroid infill for a 0.6mm nozzle Bambu Lab A1 3d printer that takes 9hours.
I'll send you an email with some more details so I don't clog up the comments