PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION🎄✨

Super excited about today's release: Twinkling Trees! I was originally planning to wait another day for this release to give myself some time to get a jump on the next releases, but was just so excited I couldn't wait to share this one! With Christmas coming up, it was inevitable that I had to do a tree at some point.. one of my favorite times of year has always been decorating the tree... so why not decorate a 3D clicky tree!? I haven't done any designs with cute faces for a while, so thought this was the perfect design to add a little character to and I just love how these turned out! 🎄✨

Thank you all so much for your continued support! You have no idea how much I truly appreciate it!

⚠️Note: It was very difficult to avoid small detail on these, especially the ones with ornaments, and I've taken some feedback from our AMAZING testers to enlarge those details where able. However, please make sure you read our printing suggestions below to get a clean crisp look. Print settings and color order details are essential to ensure a crisp, clean print!

This pack contains 2 unique base shapes and 10 unique caps offered in both flat and raised variants. There are Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Red - Hatchbox True Red PLA
• Green - Elegoo Neon Green
• Yellow - Hatchbox True Yellow PLA
• Brown - Overture PLA Professional Brown

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Faces, Eyes)
• Medium Detail (Ornaments, Garlands)
• Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com