PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 🧊🍦 🚀

Since summer is here, we wanted to release some multi-clicker popsicles! In our house, popsicles are the go-to treat on a hot summer day. These popsicles won't melt or leave a sticky mess! Hope you stay cool this summer and enjoy the pawpsicles! 🧊🍦 🚀

This pack contains a 3D stacked popsicle clicker with a stationary stick, a 3D stacked popsicle clicker with a clicky stick, and a 2D popsicle. The top segment of the 3D popsicle and the base of the 2D popsicle come in the standard 7mm, 3.5mm diameter and blank keychain configurations.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Bambu Basic Red PLA
• Bambu Basic White PLA
• Bambu Basic Cyan PLA
• Bambu Basic Cocoa Brown PLA
• Cookiecad Orange Elixir
• Cookiecad Pixie Dust
• Cookiecad Solar Flare
• Cookiecad Pale Blue Elixir
• Cookiecad Lavender Elixir
• Cookiecad Green Apple Elixir

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)

Attention Bambu P2S and H2C users - We recommend changing the following settings for the 2D popsicle base to ensure a tight fit:

Turn on "auto circle contour-hole compensation" Ensure order of walls is "outer/inner" Set smooth coefficient to 80

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com