This monster pumpkin is a great keychain for Halloween. It can also be used as a Jack-O-Lantern if you print it big enough. Follow for more daily designs. Feedback would also be appreciated.

Monster Pumpkin🎃🎃🎃

This is Ponder merchandise that you can 3D print to show that you are a fan of the Ponder designs. Follow for more daily designs. Also, feedback would appreciated.

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse: https://www.thingiverse.com/ponderstudio/designs

Ponder Keychain

This is a pencil/pen grip. I would really appreciate some feedback on what you want to see next. A follow would make me very happy as well. 

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse:
https://www.thingiverse.com/ponderstudio/designs

Pencil Grip

I have been working on this project for over three and a half years, and I finally have my first prototypes functioning. To use this watch, first, place a couple drops of water on the tiny hole on the top of the watch until it all sinks into the watch. Make sure to only fill one triangle, you can always place another drop in if over time, some of the water drained out. One triangle is one hour and there are 12 so that you can tell time. Throughout the day, the water will flow through the micro tubes in a circle making it possible to tell time. Then, Insert a band through the middle of the watch. Once all that is done, please, feel free to tell me what you think of this design by commenting. If you are still confused, a PDF manual is on the way. I try my very best to post every day so make sure to like, share, and follow.

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse: https://www.thingiverse.com/ponderstudio/designs

Think Watch V2 ⌚⌚

This is a grip that can be used by snaping on to a push button. When the grip is on, you can press the button down way more easily than without it. This is also a very short print and is also easy to print many. Feedback would also be very much appreciated as it really helps me know what you want. Don't forget to follow while you are still here.

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse: https://www.thingiverse.com/ponderstudio/designs

Push Button Grip

I have been working on this project for over three and a half years, and I finally have my first prototypes functioning. To use this watch, first, place a couple drops of water on the tiny hole on the top of the watch until it all sinks into the watch. Make sure to only fill one triangle, you can always place another drop in if over time, some of the water drained out. One triangle is one hour and there are 12 so that you can tell time. Throughout the day, the water will flow through the micro tubes in a circle making it possible to tell time. Then, Insert a band through the middle of the watch. Once all that is done, the water Please, feel free to tell me what you think of this design by commenting. I try my very best to post every week so make sure to like, share, and follow. 

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse: https://www.thingiverse.com/ponderstudio/designs

Think Watch ⌚

Think Watch

This is a recycling bin for all your supports, rafts, or failed prints made of PLA. This is also a very useful gift for any maker out there. Please, feel free to give me feedback on any of my designs, it would really help. Don't forget to follow me on both Thingiverse, Cults, and Thangs. You can find the links on my profile page.

3D Waste Bin ♻️♻️♻️

This pen/pencil holder is made to keep up to nine pens or pencils. The hole of the outer eight holes are ten millimeters in diameter and the middle hole is twenty millimeters in diameter. Please read the print settings for the best print results. If you happen to like my designs, please follow me. A tip would also be very much appreciated. It means a lot to me. Enjoy!

Pencil/Pen Holder ✏️🖊️✒️

Pencil Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5423940.

This is a one-piece print in place drawing compass that can print within 30 minutes for an easy, quick print. To use this compass, place a thumbtack in either the left or right hole. Then, put one pencil in the desired hole. This is also a great gift for everyone who loves to make and draw. Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me.

Compass (Quick Print)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5408491.

The Think Ring has a built-in mind map for thinking on the go. You can use the Think Ring to plan, create play, and more. One size fits all people! Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me. If you want to tip me, it will also help me. Enjoy!

Think Ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5424842.

This is a model of a keyboard that can be used as a prop or anything you want This is also a great gift for everyone who loves gadgets and props. Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like my designs and follow me for much more coming soon.

Print In Place Keyboard Prop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426729.

This miniature card holder is a great way to keep your cards and post its organized. You could also use this to organize your books although it is recommended to use this only for cards and post-its. This is also a great gift for anyone! Please tell me what you think and read the requirements for a successful 3D print. I try my very best to post every day so make sure to like and follow me.

Book End (Fast Print) 📚📖📙

Book End (Fast Print)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5413420.

Think Ring 2 is meant to give a more comfortable experience when wearing it all day. Think Ring 2 also features a bigger, easier to read mind map. You can use the Think Ring 2 to do the same things as the original Think Ring. Log, create, play, Navigate and more. Think Ring 2 also features a one size fits all design! Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me. You can find my other Think Rings here:

Think Ring 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5435122.

This is an upgraded version of my Ultimate Compact Toolbox (5426166). This new toolbox has many built-in tools such as screw and nut jig, rulers, and many more. This is also a great gift for every maker out there. Please, tell me what you think and read the requirements for a successful 3D print. I try my very best to post every week so make sure to like and follow me. I also want to thank you so much for getting my Mind Pad (5420091), the most popular design of the month. It means a lot to me.

Ultimate Toolbox Pro

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5408508.

This stylus has a keychain for attaching to anywhere. However, it only works with conductive 3D printing filament. Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me. If you want to tip me, it will also help me. Enjoy!

Studio Stylus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5427202.

This center finder is easy to use and made for a one-piece fits all design. To use it, line up the rectangular cut-outs and place the hole in the center. This is also a great gift for every maker out there. Please tell me what you think and read the requirements for a successful 3D print. I try my very best to post every day so make sure to like and follow me.

Easy Center Finder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5420091.

The Mind Pad Features 77 carefully positioned to make a seamless mind mapping experience. I've been working on this for weeks so please tell me what you think and read the requirements for a successful 3D print. I try to post every day so make sure to like and follow me for more free 3D designs.

Mind Pad

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5439746.

This is a self-watering planter that can be printed in one piece. This is also a great gift for every gardener out there. Please, tell me what you think and read the requirements for a successful 3D print. I try my very best to post every week so make sure to like and follow me. I also want to thank you so much for getting my Mind Pad (5420091), the most popular design of the month. It means a lot to me.

Modern Desktop Fountain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426448.

This is a simple food safe bowl for everyone in general. The rounded edges of the bowl make the bowl really nice and unique. This is also a great gift for every chef or kitchen worker out there. Please tell me what you think and read the requirements for a successful 3D print. I try to post every day so make sure to like and follow me.

Simple Mini Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426166.

This is one of the most compact toolboxes that you have ever saw! This toolbox has built in holes for storing screws and even six small compartments for keeping coin cell batteries, miniature tools, and so much more. This is also a great gift for every maker out there. Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me.

Ultimate Toolbox

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5408545.

Sort-A-Screw is a screw sorter that will never lose your screws. It has four spots to put your screws. Two are bigger and two are smaller. Please tell me what you think and read the requirements for a successful 3D print. I post every day so make sure to like and follow me. If you want to tip me, it will also help me. Enjoy!

Sort-A-Screw

This is a simple bird feeder that will please all birds. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Bird Feeder 🦜

This is a fantastic way to turn a normal plant pot into a self-watering plant pot. To set this up, just push it into the soil and put water into it. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Self-Watering Planter Addon

This is a noticeably big planter to fit all your plants. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Planter

Saucer.stl

Planter.stl

Hello everyone, this is PONDYR!  Are you looking for someone to follow who posts quality designs? Well, you have come to the right profile. I'd really appreciate some feedback while you're here because it would help me know what you want to see next. 

Are you looking into posting 3D designs? If so, check out my new eBook that will teach you the basics of posting, 3D printing and so much more. Click [here](https://a.co/d/cPF52if) to get the book.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

PONDYR

Achievements

Sequoia

Voyager

Up and Coming

Pinned models