The Self-Filling Cup uses scientific principles to partially refill after all liquid has been poured out. This model is perfect for magic shows and lessons on air pressure. To perform the demonstration, start by completely filling the cup with liquid. Next, cover the hole near the brim with a finger and pour out the visible liquid. Refill the cup by uncovering the hole.

For a more complete explanation behind the science of the Self-Filling Cup, watch "2D Water Magic" on YouTube by Steve Mould (Link below).
https://www.youtube.com/watch?v=HiDHFg68BR0

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Self-Filling Cup

Self-Filling Cup (STEP).step

Yoshi inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Yoshi Egg Light Switch Backer

Yoshi Egg Light Switch Backer (STEP).step

Tesla inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Tesla Light Switch Backer

Tesla Light Switch Backer (STEP).step

Superman inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Superman Light Switch Backer

Superman Light Switch Backer (STEP).step

Sun and Moon themed light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Sun and Moon Light Switch Backer

Sun and Moon Light Switch Backer (STEP).step

Attack on Titan inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Scouts Light Switch Backer

Scouts Light Switch Backer (STEP).step

Star wars inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Rebel and Empire Light Switch Backer

Rebel and Empire Light Switch Backer (STEP).step

Hawaii themed light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Hawaii Light Switch Backer

Hawaii Light Switch Backer (Waves) (STEP).step

Avatar the Last Airbender inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Fire Nation Light Switch Backer

Fire Nation Light Switch Backer (STEP).step

Harry Potter inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Deathly Hallows Light Switch Backer

Deathly Hallows Light Switch Backer (STEP).step

Deadpool inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Deadpool Light Switch Backer

Deadpool Light Switch Backer (STEP).step

Batman inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

STEP file included to separate layers for color change.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Batman Light Switch Backer

Batman Light Switch Backer (STEP).step

Batman Light Switch Backer (STL).stl

Personalize soda pop drinking with this rocket Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder. 
STEP file included for easy splitting of components/parts during printing.
Print fins and window separately and glue them into place.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Rocket Koozie

Rocket Koozie (STEP).step

Personalize soda pop drinking with this Squidward inspired Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder. 
STEP file included. 
Print pieces separately and glue them into place.
Supports only required on door overhang.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Squid House Koozie

Squid House Koozie (STEP).step

Personalize soda pop drinking with this Minion inspired Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included.
Print body and eye separate. Body does not require supports. Eye requires supports.
Glue eye to body.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Minion Koozie

Minion Koozie (STEP).step

Bullet (.50 caliber) inspired refillable pen. Fits Pilot G2 gel ink pen refills (0.7mm). To replace refill, unscrew tip off of the bullet.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Bullet Pen

Bullet Pen (STEP).step

Once the Pythagoras Cup (Greedy Cup) is filled beyond its limit, all of the contained liquid will inevitably spill out the bottom of the cup. The mechanism behind the magic is a called a syphon. A syphon is formed in the Pythagoras Cup when the liquid begins to fall down the internal tube (see image of section view) causing the air pressure behind the falling water to be less than atmospheric pressure. Since the air pressure in the tube is less than atmospheric pressure, atmospheric pressure pushes the entirety of the liquid out the bottom of the cup. This version of the Pythagoras Cup is perfect for magic shows and science demonstrations.
For a more complete explanation behind the science of the Pythagorean Siphon, watch "The Pythagorean Siphon Inside Your Washing Machine" on YouTube by Steve Mould (link below). https://www.youtube.com/watch?v=Cg8KQfaT9xY

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.


Pythagoras Cup - Greedy Cup

Pythagoras Cup - Greedy Cup (STEP).step

Personalize soda pop drinking with this Trash Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included to simplify multi-color printing.
No supports required.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Trash Koozie

Trash Koozie (STL).stl

Personalize soda pop drinking with this Shotgun Shell Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included to simplify multi-color printing.
No supports required.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Shotgun Koozie

Shotgun Koozie (STEP).step

Personalize soda pop drinking with this Pencil Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included to simplify multi-color printing.
No supports required.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Pencil Koozie

Pencil Koozie (STEP).step

Personalize soda pop drinking with this Warp Pipe Koozie inspired by Mario. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included to simplify multi-color printing.
No supports required.
Print Top and Bottom separate.
Glue required to attach Top and Bottom.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Mario Warp Pipe Koozie

Mario Warp Pipe Koozie (STEP).step

Personalize soda pop drinking with this Bolt and Nut Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder. 
STEP file included to simplify multi-color printing.
No supports required.
Print Bolt and Nut separately.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Bolt and Nut Koozie

Bolt and Nut Koozie (STEP).step

Personalize soda pop drinking with this Barrel Koozie. May or may not keep drinks cool. Fits a standard 12 fl oz can. Koozie Bottom file included to transform the koozie into a pen holder.
STEP file included to simplify multi-color printing.
No supports required.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Barrel Koozie

Barrel Koozie (STEP).step

The Tesla Valve Straw works as a one way flow valve. In other words, fluid flows freely in one direction, but flow is constrained in the other direction. This model is for visual representation only as it does not fully function as a one way flow valve.

For more information behind the science of the Tesla Valve Straw, watch "This Tesla Valve Straw Only Works in One Direction" on YouTube by The Action Lab (link below).
https://www.youtube.com/watch?v=sxvIQMnKhIg

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Tesla Valve Straw

Tesla Valve Straw (STEP).step

The self-starting siphon uses scientific principles to initiate and maintain the flow of liquid through the siphon tube. This version is great for magic shows or to show off to friends. To perform the demonstration, simply fill up a cup with liquid and drop in the siphon. The cup must be nearly completely full in order for the siphoning effect to occur!

For more explanation behind the science of the self-starting siphon, watch "This Tube Makes Water Flow By Itself" on YouTube by The Action Lab (link below).
https://www.youtube.com/watch?v=nA_ZTkLYNtA&t=236s

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Self Starting Siphon

Self Starting Siphon (STEP).step

The Assassin's Teapot uses scientific principles to pour two different liquids from the same teapot. While the original purpose of the Assassin's Teapot was to poison enemies (not recommended), this version is great for magic shows and lessons on air pressure. To perform the demonstration, fill the two cavities in the teapot with the desired liquids (funnel file included). Then, simply cover one of the holes near the handle and tip the teapot to pour out the liquid contained in the cavity opposite the covered hole. 

For a more complete explanation behind the science of the Assassin's teapot, watch "The Assassin's Teapot Is Weird" on YouTube by Steve Mould (Link below).
https://www.youtube.com/watch?v=jJL0XoNBaac&t=439s

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Assassin's Teapot

Assassin's Teapot (STEP).step

Flower themed organizer. Cotton rounds fit perfectly in the center and are easily accessible. The petals of the organizer fit cotton swabs and a variety of make-up.
This is a remix of my single-piece Flower Organizer.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Flower Organizer (Multi-Piece)

Flower Organizer (Multi-Piece) (STEP).step

Flower themed organizer. Cotton rounds fit perfectly in the center and are easily accessible. The petals of the organizer fit cotton swabs and a variety of make-up. 
Organizer can be printed in a single color or STEP file is set-up to change colors above the petals.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Flower Organizer

Flower Organizer (STEP).step

Lego Star Wars inspired refillable pen. Fits Pilot G2 gel ink pen refills (0.7mm). To replace refill, unscrew the blade off the handle. 
Pen stand featuring a Lego hand and base included. 

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Lego Lightsaber Pen

Lego Lightsaber Pen (STEP).step

Chess themed refillable pen. Fits Pilot G2 gel ink pen refills. To replace refill, unscrew the cap of the king piece.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Chess King Pen

Chess King Pen (STEP).step

Baseball themed light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall.

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Baseball Light Switch Backer

Baseball Light Switch Backer (STEP).step

Pokémon inspired light switch backer. A safe way to personalize any single-wide light switch. To install, simply remove the light switch plate from the wall, position the backer behind the plate and reattach the plate to the wall. 

Must have an active subscription to PLApastime to distribute/sell 3D prints. Otherwise, model is under personal use only license.

Pokeball Light Switch Backer

Pokeball Light Switch Backer (STEP).step

- Unlimited access to all models
- New models released monthly
- Permission to sell prints **while subscription is active** (Please link back to PLApastime in posting)
- 3D model files and remixes not for resale

Aficionado

- Download any 10 models per month  (~50% off individual model price) 
-  New models released monthly
- Permission to sell prints **while subscription is active** (Please link back to PLApastime in posting) 
- 3D model files and remixes not for resale


Enthusiast

- Download any 5 models per month (~30% off individual model price)
- New models released monthly
- Permission to sell prints **while subscription is active** (Please link back to PLApastime in posting)
- 3D model files and remixes not for resale

Supporter

Assassin's Teapot (STL).stl

Assassin's Teapot Funnel (STEP).step

Assassin's Teapot Funnel (STL).stl

Pythagoras Cup - Greedy Cup (STL).stl

Self-Filling Cup - Bottom (STL).stl

Self-Filling Cup - Top (STL).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

PLApastime

Achievements

Seedling

Pinned models

Assassin's Teapot

Pythagoras Cup - Greedy Cup

Self-Filling Cup

Self-Filling Cup

Yoshi Egg Light Switch Backer

Tesla Light Switch Backer

Superman Light Switch Backer

Sun and Moon Light Switch Backer

Scouts Light Switch Backer

Rebel and Empire Light Switch Backer

Hawaii Light Switch Backer

Fire Nation Light Switch Backer

Deathly Hallows Light Switch Backer

Deadpool Light Switch Backer

Batman Light Switch Backer

Rocket Koozie

Squid House Koozie

Minion Koozie

Bullet Pen

Pythagoras Cup - Greedy Cup

Trash Koozie

Shotgun Koozie

Pencil Koozie

Mario Warp Pipe Koozie

Bolt and Nut Koozie

Barrel Koozie

Tesla Valve Straw

Self Starting Siphon

Assassin's Teapot

Flower Organizer (Multi-Piece)

Flower Organizer

Lego Lightsaber Pen

Chess King Pen

Baseball Light Switch Backer

Pokeball Light Switch Backer