.gif&w=3840&q=75)
.gif&w=3840&q=75)
.gif&w=3840&q=75)
%2520Print%25202%2520-%2520C%25C3%25B3pia.jpg&w=3840&q=75)
%2520Print%25202%2520-%2520C%25C3%25B3pia.jpg&w=3840&q=75)
%2520Print%25201%2520-%2520C%25C3%25B3pia.jpg&w=3840&q=75)
.png&w=3840&q=75)
This is Boo Kitty, a spooky kitty to decorate your Halloween season.
This model has about 5cm (1.9 inches) by 5.2cm (2.04 inches) but is totally resizable.
When you purchase this model you get: ▪ Boo Kitty v1: In this version the paws wiggle and can Boo can sit. In 3mf and stl. ▪ Boo Kitty v2: In this version you can snap the paws so Boo Kitty can stand. In 3mf and stl.
I'm open to suggestions and ideas if you want to see specific content.
Enjoy!
Happy Printing and thank you for your support!
Note: The .3mf has the settings/profile for a P1S and created on OrcaSlicer, check if it's needed to be change to suit your printer.
If you want a commercial license for your printed models you need to be a member of the community on: Patreon: patreon.com/palm3d Buy me a Coffee: buymeacoffee.com/palm3d Thangs Membership: thangs.com/palm3d
3D PRINTING SETTINGS 15% Infill 2 Walls Seam: Back
Tested with 80%, 100%, 120% size.