This is a case for the BIGTREETECH Octopus v1 Mainboard. It includes stl files for the case, both with supports and unsupported, the cover and an optional mounting bracket.

The case has a cutout that must be removed for the IO ports as well as several cutouts that can be optionally removed to provide cable access to different board locations. The left and bottom of the case include extra space as well as cable guides to help keep things organized.

Let me know your thoughts on the case. I'm very open to ideas of ways to improve it especially from people who print and use it.

Updated 12/24/2021: Added spot tie attachment points to cable guides.

Updated 12/26/2021: Added Extended Cover for use with large heat sinks on driver chips. Also added a tapered channel for the reset button to clear the main board when attaching the cover.

Updated 12/29/2021: I moved the reset button from the covers to a slot I created in the case itself. The reset button is now a separate part that slides into this slot. This allows printing the covers flat with the supports on the inside. I also moved the logos from the back of the case to the sides which allowed me to get rid of the ugly, difficult to remove vertical supports. The vertical Supports version of the Case is now deprecated and does not support the new reset button so you should not print it.

Updated 12/30/2021 - RELEASE CANDIDATE RC1: Fixed supports around reset button clip. This is the final version unless I, or someone else, find an issue.

Updated 1/5/2022 - RELEASE CANDIDATE RC2: Increased depth of case to provide more room for cables and cooling. Added square nut slots to case cover attachment tabs. Increased number and size of optional cutouts. Inset IO Cutout to make connections to ports easier.