tracking pixel
Christopher L

Mike Ehrmantraut 3 colour filament painting 200x215

by
OoglyBoogly
Follow
Follow
Remix Model
OoglyBoogly
OoglyBoogly
|
Image 1 of 4
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model
OoglyBoogly
OoglyBoogly
|
Image 1 of 4
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model
2D
3D
Makes
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model
 Mike Ehrmantraut 3 colour filament painting 200x215 3d model

Made with HueForge personal addition. Not for commercial use. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 1.2 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions: Start with Black At layer #4 (0.44mm) swap to Orange At layer #12 (1.08mm) swap to Jade White for the rest.


0 Likes1 DownloadsAugust 30, 2023



0 Likes1 DownloadsAugust 30, 2023