The Ender-3 V3 Plus requires significant rear clearance due to the bed cable, often making it incompatible with standard 60x70cm enclosures like the Creality Multifunction Cover. This kit reroutes the machine's vitals to shrink its operational footprint and prevent cable snags.

Kit Components • Vertical Bed Cable Cover: Replaces the stock cover to hold the cable upright, preventing it from striking the rear glass or enclosure walls. • Filament Sensor Relocation Bracket: Positions the sensor closer to top-mounted spools for a shorter, more reliable filament path. • Print Head Cable Hanger: Uses a tension system to keep the main harness from drooping into the build volume during tall prints.

Mandatory Rerouting To achieve full clearance, the following mechanical adjustments are required: • PTFE Tube: Must be routed in front of the top gantry frame. • Head Cable: Remove all stock plastic clips attaching the harness to the PTFE tube; the new hanger handles all vertical tension. • Bed Cable: Reroute the cable through the gap between the frame and the gantry, rather than behind the gantry assembly.

Technical Print Settings • Material: PETG, ASA, or ABS (Required for enclosure heat resistance) • Walls/Perimeters: 3-4 • Infill: 15% Gyroid • Layer Height: 0.1mm

Required Hardware • 2x M3x20 Screws + Nuts (for the bed cable cover) • 2x Small Zip Tie • 1x Flexible rubber string/bungee (for the head cable hanger tension)