Universal Video Projector Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5512576.

Model has been moved to Printables.com:

• https://www.printables.com/model/148171

I change my video projector recently and could not install it on its feet at the same place. I designed this mount to be as universal / modular as possible:

• The 3-points fixation has some degree of freedom, as it can slide along the wood and be reversed. If you have more the 3 points of attachments, print more screw holders.
• There is 2 different sizes of screw holder so you should be fine !
• The design allow for adjustment of “pitch” and "roll" angle of projection. The front piece of wood can be moved up and down and slightly twisted left or right.
• It is designed for the installation on the picture (reversed on shelf) but it could 100% be the other way round.
• Width of projector doesn't matter, just cut the wooden rod to the desired size.

Once you are happy with your angles just insert a small screw to fix the front wooden rod in place (see picture, in black). For the wood rod I used an easy to source 20mm diameter.

Design is a bit bulky, I would admit that ^^.

Hope it helps someone !

info: if it can help, on the picture it is a Epson EH-TW750