I remixed https://www.thingiverse.com/thing:3144724 and https://www.thingiverse.com/thing:5222431 to make a spool holder with rolling bearings for the Ender 2 Pro.

***Used 608 Bearings***
Using CHEP's Fast Printing Profile
Material: PLA
Nozzle Temp: 210°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: Yes

I

Ender 2 Pro Spool Holder

Ender2ProSpoolHolder_with_pins.stl

I modeled and printed some shitty guitar picks earlier and needed an appropriate case for them. I present "The Shitty Pick Case".
Print Settings
Material: Brown PLA+
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 60mm/s
Supports: Top-Yes, Bottom-No
I printed these using Fuzzy Skin on the outside only. For the Bottom, I used a support blocker in Cura and modified the setting so that the Fuzzy Skin setting stopped where the Top piece and Bottom piece meet.


Shitty Pick Case

ShittyPickCaseBottom.stl

Another Guitar Pick I designed when I got some brown PLA+. 

Material: PLA +
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: None
***NOTE: Let the be cool completely before removing the pick to prevent warping. ***

ShitPick.stl

I was inspired by a model I got from https://www.thingiverse.com/thing:2320184. While I liked the concept, I didt like the model as much so I made my own and shared the file on my Github (https://github.com/OddHatter/3DPrintedCustomDickPicks) and sent some to my dad. After printing my first model I saw that the picks were slightly larger than a standard pick so I remodeled them and sent some to my friends. 

Material: PLA+
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: None

**Let the bed cool before removing the picks as they will warp if you remove them when they are 'fresh'. 



CustomDickPick.stl

Model of a drink coaster with Yoda reminding you to use it. I got a spool of gree PLA+ so I made something to print with it really fast. 
Material: Green PLA+
Supports: Yes
Infill: 20%
Nozzle Temp: 215°C
Bed Temp: 60°C 

Yoda Coaster

Model of a drink coaster with Yoda reminding you to use it. I got a spool of gree PLA+ so I made something to print with it really fast. 

Summary
I modeled this in Blender 3D using the head from the .stl file I downloaded from https://thangs.com/designer/pressprint/3d-model/ROCKTOPUS-38348.

This will not print properly in vase mode yet.

Print Settings
Printer:
Ender 2 Pro


Rafts:
No

Supports:
Yes

Resolution:
0.2mm

Infill:
10%

Filament brand:
Sunlu


Filament color:
Wood


Filament material:
PLA


Notes:
Nozzle Temp: 205°C
Bed Temp: 60°C
Speed: 60mm/s

TheRockFaceVase.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

OddHatter

Achievements

Seedling

Voyager

Debutant