5 Likes13 DownloadsSeptember 27, 2024
Instructions
Filament • 0.16mm
MaterialPLA
Layer height0.16 mm
Infill density15 %
SupportsNone
BrimYes
Vase modeOff
Filament • 0.16mm
MaterialTPU
Layer height0.16 mm
Infill density15 %
SupportsNone
BrimYes
Vase modeOff
Multi-Purpose Bottle
This bottle is perfect for storing liquids or, by removing the top, can easily double as a vase. The top consists of two parts—if you're storing liquids, use Bottle 002_PRT_TPU for a tight, secure fit.
You can print the bottle in either PLA or TPU for liquid storage. Bottle 002_PRT2, however, is designed specifically for PLA and has a looser fit. You can consider printing the base in PLA and the top in TPU.
You can also print it in resin. For a watertight version, increase the number of wall loops. You can use a tapered cork stopper for the top or print a tapered TUP top.
Vase Mode OFF.
Scale both up or down.
For personal use only. NON Commercial.
5 Likes13 DownloadsSeptember 27, 2024
5 Likes13 DownloadsSeptember 27, 2024
Instructions
Filament • 0.16mm
MaterialPLA
Layer height0.16 mm
Infill density15 %
SupportsNone
BrimYes
Vase modeOff
Filament • 0.16mm
MaterialTPU
Layer height0.16 mm
Infill density15 %
SupportsNone
BrimYes
Vase modeOff