Designed for the OXO bottle brush, but will work for any cleaning brushes or kitchen utensils with a slot diameter over 9 mm. If you want to hang something that doesn't fit over the hook you can just add a twine loop to the end and hang it that way instead.
Print Recommendations Print Material: PLA Infill Percent: 15% Perimeters: 3 Layer Height: .15 Supports: NONE Print Orientation: Place the bottom of the holder against the build plate essentially printing it in the orientation that it will be placed on the wall or cabinet door. This orientation is important to ensure the holder is sturdy.
Additional Parts Required Double Sided Tape • Amazon Link to 3M .4 inch double sided tape https://a.co/d/3n44GFr • This adhesive twists off easily and doesn't leave residue.