Kyle W

Hextraction Overdrive Wave Tile

by
NoStepOnDeez
Follow
Follow
Remix Model
NoStepOnDeez
NoStepOnDeez
|
Image 5 of 7
Hextraction Overdrive Wave Tile 3d model
NoStepOnDeez
NoStepOnDeez
|
Image 5 of 7
Hextraction Overdrive Wave Tile 3d model
2D
3D
Makes
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model
Hextraction Overdrive Wave Tile 3d model

A passthrough during the early to mid-game that converts to a double dispenser in the late game.

Card Text: On Overdrive (When any tile is played and the board becomes/is full): If the starred hole is empty, place a ball in it.

If there's still any confusion, the counterweight ball does not get removed when the board kicks out of overdrive.

Hardware is an M3x12 screw with two M3 washers in between the base and flipper. This uses the same base as the Wave and the Tsunami tiles so you can swap the flippers.

This tile is part of my "Counterweight Tiles Pack". Check the others out. AltWave https://thangs.com/3d-model/1031259 Wave https://thangs.com/3d-model/1031247 Tsunami https://thangs.com/3d-model/1031250 Twozu https://thangs.com/3d-model/975596


10 Likes47 DownloadsMarch 15, 2024
1


10 Likes47 DownloadsMarch 15, 2024