A collection of all 20mm compatible multi-layer tiles from Hextraction.

Remix of Hextraction - Aqueduct Ramp by BitTorrent
Added side guards, because the ball got out from the path with high speed. While I was at it, I added a "g" tile, you can achieve some very interesting paths with it.
Sadly I had to remove the stones and trees, there was no more space left.
Do a filament change at the tile top, and use marble pla for the best effect.

Hextraction - Aqueduct Ramp with Roman column sideguards

Ramp Aqueduct, JC Tile (Joined).stl

Aqueduct_Ramp_g_Tile.stl

Play Hextraction on two different planes with these Roman-themed elevation tiles. The height of aqueduct is 20mm higher than the bottom ball channels, and is compatible with other elevation tiles (see links below) 
 
This set is comprised of a J-shape aqueduct, with different ground piece configurations (C, I, and Peace).

I've split the aqueduct portion from the main tile portion for multi-color printing on basic printers. The aqueduct can be lined up with two filament pieces and glued together. 

I've included a "joined" piece, but only for the peace tile so far (I still have to join the other style tiles and upload them later)

Compatible Tilesets:
Elevation - https://than.gs/m/898122
Roman Spa - https://than.gs/m/914553
J Aqueduct - https://than.gs/m/914537
I Aqueduct - https://than.gs/m/914544 
Aqueduct ramp - https://than.gs/m/914623


Hextraction - Aqueduct J-Tile

J-Aqua, Peace (Joined).stl

Fluffy Tree.stl

Custom game tile for the Hextraction board game.
Add a whole extra layer to your board by using this tile, stack tiles on top of each other for even more paths to the goal

( rule card will be created and this model will be updated )
rules:
Elevated Tiles:
Start in the "pool"
On draw, CREATE a Elevator Tile if no Elevator is INSTALLED. Then DISCARDthe Elevated Tile.

When playing this Tile you can UNDERWRITE (place underneath) any tile or place on a blank tile.

LIMIT: must be touching an elevator tile or an elevated tile

Elevator Tiles:
1 Starts in the "virtual pool"


Multi-Layer hextraction Tile

elavatedTile.stl

Elevator_tile_curvy.stl

Elevator_tile_turn.stl

Take your Hextraction game to the next level with this Roman-themed elevation tile. This tile lets you place any other tile on top of it, enabling the use of other raised tiles. 

Elevated tiles are raised 20mm, and are compatible with the other elevated tilesets:
Elevation - https://than.gs/m/898122
Roman Spa - https://than.gs/m/914553
J Aqueduct - https://than.gs/m/914537
I Aqueduct - https://than.gs/m/914544 
Aqueduct ramp - https://than.gs/m/914623

UPDATE: I've added a version with a little hole in the center of the tile. This lets you add a bumper in the form of a fountain (file also added). You can join them together with an M2 screw, or just glue.

Hextraction - Roman Spa, Elevation Tile

Roman Spa v3 (Big Pillar).stl

Roman Spa v2 (Small Pillar - Hole).stl

Fountain.stl

Play Hextraction on two different planes with these Roman-themed elevation tiles. The height of aqueduct is 20mm higher than the bottom ball channels, and is compatible with other elevation tiles (see links below:)

This set is comprised of an I-shape aqueduct, with different ground piece configurations (DC, and X).

I've split the aqueduct portion from the main tile portion for multi-color printing on basic printers. The aqueduct can be lined up with two filament pieces and glued together. 

I've included a "joined" pieces, for those with mult-material capable printers.

Compatible Tilesets:
Elevation - https://than.gs/m/898122
Roman Spa - https://than.gs/m/914553
J Aqueduct - https://than.gs/m/914537
I Aqueduct - https://than.gs/m/914544 
Aqueduct ramp - https://than.gs/m/914623

Hextraction - Aqueduct I-Tile

I-Aqua, DC Tile (Joined).stl

Remix of Hextraction - Aqueduct J-Tile by BitTorrent
Added side guards, because the ball got out from the path with high speed.
Sadly I had to remove the trees, there was no more space left.
Do a filament change at the tile top, and use marble pla for the best effect.
Print whole, or the top piece separately. I printed them separate, because I used the  already printed original top pieces by BitTorrent

Hextraction - Aqueduct J-Tile with Rman column sideguards

Aqueduct_J_Piece_Top.stl

Aqueduct_J_Piece_Ground.stl

Aqueduct_J_Piece_Combined.stl

Remix of Hextraction - Aqueduct I-Tile by BitTorrent
Added side guards, because the ball got out from the path with high speed.
Sadly I had to remove the trees, there was no more space left.
Do a filament change at the tile top, and use marble pla for the best effect.
For the X tile, you can use the original, the ball won't fall out.

Hextraction - Aqueduct I-Tile with Roman column sideguards

Aqueduct_I_DC_Alternative.stl

Aqueduct_I_DC.stl

A bridge that spans most of the Hextraction board, letting you pass over existing tiles on the board or fall right into them. 

Concept created before BitTorrent's aqueducts were uploaded, but my tile was not printed and tested until after his were uploaded. This tile wound up a bit taller than his, and I hadn't considered putting more than one next to eachother so this breaks the boundaries of the four tiles it's supposed to cover. V2, still in the concept phase, will be more compatible with other tiles that are taller than normal, and should fit in with BitTorrent's tiles fine, being similar in height and not spilling over into the surrounding tiles. Further, V2 is split into three separate pieces as this current version requires a lot of supports that can cause issues if they fall over during the print.

Uses the Forbidden keyword, because it is larger than one Hextraction grid. I recommend calling a vote before putting into the draw bin or your opening hand, rather than on play, so that it doesn't clog up valuable hand space.

This can be placed at an angle, but due to it's steep slope, it requires a bit of momentum to get into at an angle. This tile is also a bit too large for the standard board in most situations. It's recommended for use on larger boards, or else include only one instance of this in the whole draw pool. As a consequence of being placed at an angle, tiles on top could wind up at a weird angle too!

Rules card reads: "Forbidden. Both Ends must bottom out. Tiles underneath cannot be destroyed until this is. Tiles may be placed on this tile's empty slots"

Multitile Bridge V1

Multitile Bridge Tile.stl

Hexure. Hextain. Hextect.

**Foundation Tile**
On play: Secure a tile on top of the Foundation tile. Choose a tile from your hand to be the secured tile, or overwrite a tile already on the board and use that tile.
On destroy: Containment breach! Place the secured tile on the board in this tile's old slot, in any orientation you choose.

[The engraving and theme of this tile is based on the SCP Foundation logo](https://scp-wiki.wikidot.com/licensing-guide).

Hextraction Foundation Tile

Hexure. Hextain. Hextect.

**Foundation Tile**
On play: Secure a tile on top of the Foundation tile. Choose a tile from your hand to be the secured tile, or overwrite a tile already on the board and use that tile.
On destroy: Place the secured tile on the board in this tile's old slot, in any orientation you choose.

[The engraving and theme of this tile is based on the SCP Foundation logo](https://scp-wiki.wikidot.com/licensing-guide).

Foundation Tile.stl

A ramp tile for the Aqueduct elevation tile series. Lifts the ball 20mm up to join other elevated tiles.

I've provided both joined tiles and tiles where the aqueduct is a separate piece (for multi-color printing). 

The little hole in the J-Tile is to add a little decoration like the "Fluffy Tree" item in the file list (more decoration accessories coming soon)

Compatible Tilesets:
Elevation - https://than.gs/m/898122
Roman Spa - https://than.gs/m/914553
J Aqueduct - https://than.gs/m/914537
I Aqueduct - https://than.gs/m/914544 

Hextraction - Aqueduct Ramp

A Secret tile overhaul that's optionally compatible with [20mm layer tiles](https://than.gs/c/66284).

This set is a one-stop shop that fixes a variety of preexisting issues with secret tiles and adds additional features. All lids click in with dual latches, which stay put but are easily removed, and don't have tolerance/ clearance issues unlike the original pin style. The pack offers a variety of 16 bottoms, which in a full set, have been balanced for optimal randomness. The *stack lids* offers compatibility with layer tiles, or any other 20mm layered tile, which expand the pathing options of the prior few foundations. If you play with the new [Start Ramp Tile](https://than.gs/m/1134242), it guarantees pathing to the second layer when possible. If you play with the new [Reveal Tile](https://than.gs/m/1134244), it allows players to remove secret lids with an effect. This wasn't possible before as the originals were half height tiles and balls would jump out of them instead of pathing. Furthermore, the *SecretClick Mold STEP* and the *SecretClick Blank STEP* enable creators to easily convert preexisting tiles or make new ones from scratch.

**Lid Variations**
*All lids got a v2 with improved latch strength by changing print orientation and slightly different dims in the inner hex. The new lids are compatible with the same bottoms.*
- **Flat Secret |** Use this if you want a replacement for standard secret tiles
- **Stack Open |** Use this if you want additional foundations for layer tiles. *Rules card recommended*
- **Stack Secret |** Use this if you want secret foundations. *Rules card recommended*
- **Shahrazad |** Strongly not recommended. *The tile detailing and its rules card are found in Zack's* [Shahrazad](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%2520Shahrazad%2520Tile-863261).

**Rules Card** *Stack Lids Only*
Setup: Orient as shown. Create [Start Ramp](https://than.gs/m/1134242), if able.
Ongoing: This is a grid slot. When destroyed, destroy tiles stacked on this.

**Printing / Assembly Instructions**
- All lids are printed bottom edge to bed and require tree supports. Secret lids get an optional *LidClick Inlay* glued in place. All bottoms are printed without supports. 
- Recommended to print one of each bottom and only one type of lid. This set has been balanced for optimal randomness. Adding or removing some tiles from the set will skew the pathing/trap percentages. However, feel free to print as many or as little as you desire!
- [Flip-Flop](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Flip-Flop%20Tile-856502) and [Twozu](https://thangs.com/designer/NoStepOnDeez/3d-model/Hextraction%2520Twozu%2520Tile-975596) get 1 or 2 washers and an M3x8 or M3x10 screw each. Tweak the screw depth and washer count for desired logic.
- Lid rules cards have _Secret_ and _Open_ variations to match your tile's aesthetic.

**Remixing Tips**
- **Notes |** Make sure to download the  *SecretClick Mold STEP* and *SecretClick Blank STEP*  files in the .step format. There's general guidelines I followed to create secret tiles. I gave all notches available, all walled-edges are now pseudo paths, and no gutter paths are allowed. This is so opponents can't differentiate tiles when someone draws/plays it. Additionally, any tile that requires player input or has a special effect never works as a secret. Feel free to break these guidelines and make something these your own!
- **Create a tile from scratch |** Use the *SecretClick Blank STEP* as a starting point and create custom pathing. Allow for enough material on the corners so the latch slots aren't too brittle.
- **Convert preexisting tiles |** Mate the *SecretClick Mold STEP* to the top face of any standard height tile and "cavity cut" it with 0 scaling. Not every tile can be converted, there needs to be enough material on the corners so the latch slots aren't too brittle.

These tiles are part of my *Secrets and Stackers Pack*. Check the others out.
Blank Stack https://than.gs/m/1261537
Framework https://than.gs/m/1249623
Scaffold https://than.gs/m/1249608
Start Ramp https://than.gs/m/1134242
Reveal https://than.gs/m/1134244

Hextraction Secret Click Tiles

SecretClick Asterisk.STL

A ramp spawned by [20mm layer tiles](https://than.gs/c/66284).

The ramps are designed to guarantee pathing when played vertical. However, when played diagonally, a ball needs enough speed to travel up a ramp. Rules/notches are designed to incentivize starting layered play without being overpowered.

**Rules Card**
Virtual
Limit: Can't play if any type of ramp is installed. Ramp-out-edge must be adjacent to parent tile. Ramp-in-edge can't be adjacent to edge of board.

**House Rules** *Recommended*
All non-ramp [20mm layer tiles](https://thangs.com/designer/NoStepOnDeez/collection/20mm%20Layer%20Tiles-66284) create a Start Ramp, if able.

**Printing Instructions**
- Base does not need supports
- Ramps needs supports.
- Recommended to print a DC Ramp and V Ramp.
- Card has *1 part* and *2 part* variations.

**Assembly Instructions / Optimal Play**
- **DC Ramp |** Glue *Ramp Closed* into *Base DC*. Recommended to create a *DC Ramp* when spawned from a channeled Aqueduct tile.
- **V Ramp |** Glue *Ramp Open* into *Base V*. Recommended to create a *V Ramp* when spawned from a foundation tile.

These tiles are part of my *Secrets and Stackers Pack*. Check the others out.
Blank Stack https://than.gs/m/1261537
Framework https://than.gs/m/1249623
Scaffold https://than.gs/m/1249608
Secret Click https://than.gs/m/1134237
Reveal https://than.gs/m/1134244

Hextraction Start Ramp Tiles

StartRamp Ramp Open.STL

Tile for my favorite [SIX-SIDED GRAVITY GAME](https://www.playhextraction.com/).

---

You love stacking those nice 20mm tiles, but your other players don't do it as often as you like? Slam this down and force em.

This is just a dead end if you don't use stackable tiles in the main pool. 
NoStepOnDeez has a [public collection](https://thangs.com/designer/NoStepOnDeez/collection/20mm%20Layer%20Tiles-66284) of such tiles and also did the fantastic [secret tiles](https://thangs.com/designer/NoStepOnDeez/3d-model/Hextraction%20Secret%20Click%20Tiles-1134237) with clicky lids. grab em!!

---

Big love to all the folks at the Voidstar Labs Discord, workshopping the rules for this card with me.
Source file: [Onshape](https://cad.onshape.com/documents/0b468894916b30f7492445a5/w/4bb91bfcb69e122e15e368be/e/2adb0f5479115b4c80fbcf1f7)

Hextraction Brick Tower Tile

Brick Tower - Card.stl

A stacking tile that has a gutter drop-in trigger. When rolled through it overwrites the tile on top of it. Compatible with [20mm layer tiles](https://than.gs/c/66284).

**Rules**
Ongoing: This is a grid slot.
Trigger: Play / overwrite an extra tile in the highest slot stacked on this, if able.
(If highest slot is empty, play an extra tile there. If highest slot is occupied, overwrite it with an extra tile.)

**Printing**
 Supports = Normal, Everywhere.

These tiles are part of my *Secrets and Stackers Pack*. Check the others out.
Blank Stack https://than.gs/m/1261537
Scaffold https://than.gs/m/1249608
Secret Click https://than.gs/m/1134237
Start Ramp https://than.gs/m/1134242
Reveal https://than.gs/m/1134244

Hextraction Framework Tile

Framework Tile.STL

A tile that converts any standard tile into a compatible [20mm layer stackable](https://than.gs/c/66284).

Play a Spawner tile and swap it out for a Scaffold from the virtual pool. Scaffolds typically need at least 1 adjacent tile to be stable. If it's loose, it can't be played there. Funny enough, the Scaffold works when played on an empty grid slot that's totally surrounded. However, I didn't allow it in the rules as it's a bit too complex and too similar to the [Framework Tile](https://than.gs/m/1249623). If you want, allow it with house rules.

**Rules**
- **Spawner |** On Play: Destroy This. Then create a _Scaffold_ on a standard height tile, if able.
- **Scaffold |** Forbidden Virtual; Setup: Orient as shown. Ongoing: This is a grid slot. Disable effects of tile(s) under this if they're hidden. (Hidden = Not visible through the Scaffold's grid slot. Viewing from the side is irrelevant.)

**House Rules**
Scaffolds can be played in an empty slot, if stable.

**Variations & Printing**
- **Printed Legs**. _Recommended_
   - Print with bottom edge to the bed. Supports = Normal, Everywhere.
   - Due to its geometry, it can be played adjacent to ramps, Aqueducts, Secret Clicks and non-standard height tiles. However, it can't be placed adjacent to Scaffolds and side gutters.
- **M2x12 Legs**
   - Print with screw mounts touching bed. Supports = Normal. Requires six M2x12 screws. 
   - Due to its geometry, it can **not** be played adjacent to Secret Clicks, non-standard height tiles, Scaffolds, and side gutters. However, it can be played adjacent to ramps and Aqueducts.

These tiles are part of my *Secrets and Stackers Pack*. Check the others out.
Blank Stack https://than.gs/m/1261537
Framework https://than.gs/m/1249623
Secret Click https://than.gs/m/1134237
Start Ramp https://than.gs/m/1134242
Reveal https://than.gs/m/1134244

Hextraction Scaffold Tile

Scaffold LegsPrinted.STL

Forge your way to the end with this new Hextraction Tilepack: BlastFurnace

I was looking for a way to ensure that stacking tiles would be played frequently in a match, so I created these!

The Furnace tile can be a effective counter if your friends use a LOT of trap tiles.

The Hopper tile is ONLY effective at screwing up tile combos

And The Ingot tile is pretty much the best tile ever for endgames.

RULES:
BlastFurnace: Ongoing: if a ball gets trapped Destroy that tile and create a iron hopper or ingot.

IronHopper: Virtual On play: Move a adjacent tile on top of this tile .

IronIngot: Virtual Ongoing: Cannot be moved or overwritten.

*Specifications*

BlastFurnace's Ability is NOT OPTIONAL no matter the circumstances!

IronHopper's Ability cannot be used if there are no adjacent tiles.

IronIngot's Ability does not effect Destroy.

 [](url)

Hextraction BlastFurnace BattlePack

BlastFurnace Card.stl

10mm balls travel up the ramp and exit through the upper path while 3/8" (and smaller) balls exit through the lower path. Color swap by layer on Detail & glue Detail in either side. Compatible with [20mm Layer Tiles](https://thangs.com/designer/NoStepOnDeez/collection/20mm%20Layer%20Tile%20Collection-66284).

These tiles are part of my *Sorting Pack*. Check the others out.
Filter Drop https://than.gs/m/1255155
Filter Flip https://than.gs/m/1255160
Filter Jump https://than.gs/m/1255156

Hextraction Sorter Ramp Tile

SorterRamp Base.STL

Tile for my favorite [SIX-SIDED GRAVITY GAME](https://www.playhextraction.com/).

---

More on-ramps = more FUN. Also includes a 20mm version to kickstart any shenanigans you folks might enjoy.
Sure sure another on-ramp is not that useful, but let me tell you, nothing prevents anyone to move those tiles further down! Now thats gameplay!

---

Big love to all the folks at the Voidstar Labs Discord, workshopping the rules for this card with me.
Source file: [Onshape](https://cad.onshape.com/documents/0b468894916b30f7492445a5/w/4bb91bfcb69e122e15e368be/e/822769b225ff6e67c43b0210)

Hextraction Additional On-Ramp Tile

On-Ramp - Tile.stl

Used to create [20mm layer stacking tiles](https://than.gs/c/66284). Check the pictures for a ball path profile. Don't print this thing.

This tile is part of my *Secrets and Stackers Pack*. Check the others out.
Framework https://than.gs/m/1249623
Scaffold https://than.gs/m/1249608
Secret Click https://than.gs/m/1134237
Start Ramp https://than.gs/m/1134242
Reveal https://than.gs/m/1134244

Hextraction Blank Stack Tile

Blank Stack Tile.STEP

A screwy tile for Zack Freedman's [Hextraction](https://www.playhextraction.com/). This tile is optionally a combo tile or a mechanical tile. Play the halves together or separate. 
 
If played together, it's a mechanical tile with moving parts!  You may unscrew the bolt to any position you like. The bolt half has a tab that blocks travel in the nut half, so you can create a variety of paths. The threads will be a little loose, so don't expect it to stay where you left it.

If played separately, it's a combo piece. Follow normal combo rules about tile placement and destruction.

Hextraction Nut And Bolt Tile

Bolt.stl

20mm Layer Tile Collection

Hextraction Double Lane Tiles

Double Lane Asterisk.STL

Hextraction Gauss Cannon Spinner

Gauss Card (1 Part).STL

SecretClick Blank STEP.STEP

Hextraction Gear Train Tile

GearTrain Base Lower.STL

I mainly make tiles for [Hextraction](https://www.playhextraction.com/) and run its [Community Catalog](https://docs.google.com/spreadsheets/d/1JfqIVOjToIS0rCQC8AIWeRLpMmSNDphn8_660eaTjaY/edit?gid=414788452).

Show your support on Ko-Fi!
https://ko-fi.com/nostepondeez

NoStep

Achievements

Voyager

Fan Favorite

Sapling