0 Likes1 DownloadsOctober 8, 2024
Gravestone Freddy Halloween Decoration Hueforge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 136.86x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.7mm
Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Skin Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.88mm) swap to Red At layer #17 (1.52mm) swap to Skin At layer #25 (2.16mm) swap to White for the rest.
0 Likes1 DownloadsOctober 8, 2024
0 Likes1 DownloadsOctober 8, 2024