A 3d Topo Map of Santa Cruz Island off the coast of california

Santa Cruz.stl

Simple geometry holds a reasonable number of cards.  This uses hair elastics to hold it together and hold the cash.

I might add a clip later, it depends how I feel about it. 

Hard sided printable wallet Version 3

Print Wallet III.stl

Window Sill Pot (1).stl

A pot for a potted plant with a built in drain plate.

Plant Pot.stl

The new food processor did n't come with a rack for the blades so I made one

Food processor blade rack 

This is a terrible idea but I had to make it so it could get out of my head. 

It prints upside-down with the hollow for the magnet facing up

Saddam's Spider Hole Magnet

This is a little project to hold a kitchen sponge in a way that won't trap water.

The key to this project is that the B part needs to printed out with zero walls, top and bottom.  Just pure infill.  I used Gyroid. 

Kitchen Sponge Holder

Sponge holder A.stl

This one is a bit better than the MKI.  Printed in TPU it has a crazy flipping action.
Not the final version but It is coming along. 

Hairy fish MKII.stl

This lure looks cool but the action is weak sauce.  It probably needs some revision.
This one is printed in tpu but it still isn't as flexible as I had hoped. 

Hairy fish.stl

You will need two of these and some hair elastics and this gives you a nice way to carry your 18650 lithium batteries with you in your carry on, while your actual equipment is in your checked baggage

18650 holder (1).stl

Looks like a tadpole bass lure, probably works. 

Fat head Fishy.stl

Test fishing lure, not ideal but a solid first try.

Fishy lure Mk Ia.stl

This holds a dozen bottles of Army Painter style dropper bottles in a secure and small storage size. 

Miniature Paint Organizer 

Paint tray.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3575851.

Have you ever wanted a mini with less detail?
This is the least detail I could go and still work.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/691dX9HkdfG

Basic Mook figure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3439782.

Inspired by the nearly indestructible old military desks that used to be everywhere, this is my version for rpg use, 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/k4PzCYkYOqH

Mid Century Desk

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3381821.

Sometimes your game needs a lumpy old mattress

This one should be lumpy enough

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kWbq5yScdAV

Lumpy Mattress

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3558087.

A tiny chair that will print with no supports and doesn't need to be glued together.

This is the Desk  https://www.thingiverse.com/thing:3439782

Here is the Computer  https://www.thingiverse.com/thing:3156287

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jT5YhJ3y4kn

No Support Chair

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4998515.

Hearse for tabletop wargaming.  Uses 1.75 mm  filament as axels.

Hearse

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3296236.

This is the 3rd tile in my cave tile series

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kXChCvyY8S3

A_03

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4076013.

Here is a fun little bit of retro-futurism.  I was thinking it would be fun game scatter. 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6HqyfzSt0O1

Retro Space Car

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4086577.

A collection of 1:60 scale trucks for wargaming on a common chassis

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6ZVX2RRDDO2

Retro Future Trucks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4075720.

As if there was a shortage of phone holders, here is one more.  This one should print without supports

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/a8halyh4kNP

Phone holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3561701.

A simple 28mm scale dumpster for tabletop gaming.  For best printing the lid and body should be printed separately, but the cover shot STL will print ok if you turn on internal supports and never try to open the lid. 

A normal staple works good as the hinge pin

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1wUv4LvH9lC

Dumpster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3553585.

I am not totally happy with this dog house, but for now it is done.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4I2u0eIRS0R

Epic Juttuli

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3659137.

This lovely starship was inspired by a famous Starfinder ship

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bRZrZXDW4lP

Sunrise girl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3686045.

This dice has no 1 or 20, but it has an extra 9 and 11.  For the player that is a hour later and has forgot everything at home

The "Copy of" file  has inset numbers so it will  roll much better.  Ironically this makes it a better dice, which is somewhat against the original purpose.  


This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/daSf04myBNY

Late Player Dice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3381849.

This is the lumpy mattress on a basic bedframe

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1X2dtvvoRyK

Basic Bed

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3327092.

Another bit of scatter for gaming use.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ccPdOwJEedm

Barrel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3436926.

This is unsurprisingly the 9th in my series of cave tiles. Collect them all!

These were all made in a combination of Medium and Tinkercad, and I think they are getting better as I go along.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6fX1cJAitak

A_09

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3283005.

2nd cave section. This one is a dead end. Made in Medium and Tinkercad

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6YxOBhVV50Q

A_02

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4078922.

Sango Bruticus is a bit more Blade Runner than my other work.
It  should fit in nice where a cyberpunk vibe is needed.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aQM13U0p1Mz

Powerful Sango-Bruticus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3354390.

This is #7 in my modular cavern tiles.  

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/028Kixw6cJX

A_07

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3383333.

A very simple little dresser for all your dungeon needs

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jiOv05KVNjx

Short Dresser

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3283001.

2nd cave section. This one is a dead end. Made in Medium and Tinkercad

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6YxOBhVV50Q

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3319877.

5th in my cave tile system

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bvlunS4aI0r

A_05

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3317854.

4th in my series of cave tiles

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Lw5KLIiDQF

A_04

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3272314.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7uE8UFSkeUt

Hex 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3272322.

This is a bit of a workflow test.  I started out with a base in Tinkercad, then imported it into Oculus Medium.  In Medium I carved the walls.  Then I reimported it to Tinkercad to clean up the details and do some scaling.

This thing was made with Tinkercad. Edit it online 

https://www.tinkercad.com/things/f11joQa2HVX

A_01

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3352236.

This is the 6th of my series of cave tiles.  This one is an entrance. 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eKlGVrXheAP

A_06

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4981122.

Wagon for wargaming scenery.  Roughly 28mm scale. is designed to use 1.75mm filament as axles.  

Extra wheel included if you need it.

If you want to modify this using the original file.
https://www.tinkercad.com/things/9xRRNJXHMpe

Wagon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3357035.

This is unsurprisingly the 8th in my series of cave tiles.  Collect them all!

These were all made in a combination of Medium and Tinkercad, and I think they are getting better as I go along.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1Bl0tYSAovO

A_08

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3267806.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gf6vVQiwNIl

Super Robo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3242866.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eRYYd4nAkJQ

Computer Desk

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3531819.

Based on my earlier Van, this one has been fully trashed  and is ready to be part of your post apocalyptic scene. 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ljUZDVByhbF

Beat Van

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4863371.

A nice sealed box to use as a wet palette.
I use a damp paper towel to hold the water and a bit of cooking  parchment for the mixing surface.

Wet Palette

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4914538.

This holds corks for crafting.
I use this to hold miniatures while I paint them.  A dab of white clue secures the mini to the base while I paint, then I pop it off with  a knife.   

Cork Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3849780.

All purpose containment tank for all of your science fiction wargaming needs.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fRPnIRIevUJ

Rehab tank

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3429022.

A simple 28mm port o john because what is a battle field  if there is no place to poop.

The door needs to be taped or glued into the ideal action scene.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lGjhrjWHtUb 

Port o John

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3326013.

Box and crate scatter for RPG games.

EDIT: Boxes 2 has a small update that lets it print without supports and makes some of the boxes a big bigger which I also find nice. 

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/053Q9NVc1Ns

Boxes

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3622374.

A 28mm scale office cube.  Some games require a the horror to be a bit more existential.

The chair https://www.thingiverse.com/thing:3558087

Here is the Computer https://www.thingiverse.com/thing:3156287

The tile set https://www.thingiverse.com/Nf1nk/collections/sci-fi-tiles

Office Cubicle

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Nf1nk

Achievements

Sapling

Fan Favorite

Santa Cruz.stl

Hard sided printable wallet Version 3

Window Sill Pot (1).stl

Plant Pot.stl

Food processor blade rack

Saddam's Spider Hole Magnet

Kitchen Sponge Holder

Hairy fish MKII.stl

Hairy fish.stl

18650 holder (1).stl

Fat head Fishy.stl

Fishy lure Mk Ia.stl

Miniature Paint Organizer

Basic Mook figure

Mid Century Desk

Lumpy Mattress

No Support Chair

Hearse

A_03

Retro Space Car

Retro Future Trucks

Phone holder

Dumpster

Epic Juttuli

Sunrise girl

Late Player Dice

Basic Bed

Barrel

A_09

A_02

Powerful Sango-Bruticus

A_07

Short Dresser

A_02

A_05

A_04

Hex 3

A_01

A_06

Wagon

A_08

Super Robo

Computer Desk

Beat Van

Wet Palette

Cork Holder

Rehab tank

Port o John

Boxes

Office Cubicle