Tranquil Civic Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA PolyTerra Charcoal Black PLA HP3D Red PLA BambuLab Basic Jade White 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Jade White for the rest.