tracking pixel
Daniel A

Traditional Miata Magnet

by
NeoKoi Prints
Follow
Follow
Remix Model
NeoKoi Prints
NeoKoi Prints
|
Image 3 of 3
Traditional Miata Magnet 3d model
NeoKoi Prints
NeoKoi Prints
|
Image 3 of 3
Traditional Miata Magnet 3d model
2D
3D
Makes
Traditional Miata Magnet 3d model
Traditional Miata Magnet 3d model
Traditional Miata Magnet 3d model

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects.

Filaments used in example: Polymaker Charcoal Black PLA Bambu Labs White PLA Basic HP3D Red PLA+ HP3D Yellow PLA+ 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White for the rest.


14 Likes5 DownloadsJanuary 29, 2024


14 Likes5 DownloadsJanuary 29, 2024